Hisense Dishwasher Error E05

⚡ Quick Answer: The Hisense Dishwasher E05 error indicates a drainage issue or potential water leak, leading to the activation of the flood sensor. Users may notice t... ✅ DIY Fixable

What Does Error E05 Mean?

The Hisense Dishwasher E05 error indicates a drainage issue or potential water leak, leading to the activation of the flood sensor. Users may notice the E05 code appearing at the start of a cycle or during operation, often accompanied by unusual sounds. Symptoms include standing water inside the unit or on the floor, and the dishwasher may stop mid-cycle due to these issues. It's essential to address this error promptly to prevent further damage.

Common Symptoms:

  • Dishwasher displays E5/E05 error on the control panel
  • Error appears at start or during cycle
  • Possible standing water or evidence of water on floor
  • Unit may stop mid‑cycle

Possible Causes

  • Flood sensor triggered due to water in the base (overflow/leak) (medium)
  • Drainage issue causing water to remain and trigger overflow detection (medium)

How to Fix Error E05

DIY Fix Inspect and clear drain/filter

  1. Turn off and unplug the dishwasher.
  2. Remove bottom filter and clean out food debris.
  3. Check drain hose for kinks or blockages.
  4. Ensure sink drain isn’t clogged and water can flow freely.

DIY Fix Check for water leak/overflow in base

  1. Pull dishwasher slightly out and look under the base for water.
  2. If water is present, tilt unit backward with towels placed to absorb water.
  3. Allow excess water to drain before plugging in and testing.

Technician Only Test and service drainage and sensor assembly

  1. Verify proper operation of the drain pump and impeller.
  2. Inspect flood sensor (float switch/pan sensor) for faults or corrosion.
  3. Check wiring to pump and sensor for continuity.
  4. Replace faulty drain pump or sensor as needed.

Parts needed: Drain pump, Flood/overflow sensor, Drain hose

🛑 When to Call a Pro:
  • Water observed pooling under unit
  • Unsuccessful after filter and drain clearing
  • Repeated E5 errors after basic checks

Next step

Choose the next step for E05

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E05 error mean on Hisense Dishwasher?

E05 indicates a drainage problem or water leak, causing the flood sensor to activate.

Can I fix Hisense Dishwasher E05 error myself?

Yes, you can inspect and clear the drain/filter and check for leaks.

How much does it cost to fix E05 error?

Repair costs range from ¥10,000 to ¥40,000+, depending on parts and labor.

When should I call a technician for E05?

Call a technician if water is pooling under the unit or if the error persists after basic checks.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!