Hisense Dishwasher Error E01

⚡ Quick Answer: The Hisense Dishwasher E01 error indicates a drainage issue, often causing the dishwasher to stop mid-cycle. Symptoms include standing water at the bo... ✅ DIY Fixable

What Does Error E01 Mean?

The Hisense Dishwasher E01 error indicates a drainage issue, often causing the dishwasher to stop mid-cycle. Symptoms include standing water at the bottom and the appliance failing to drain properly. This error may arise from a blocked drain filter or hose, or a faulty drain pump, which can prevent the dishwasher from draining or filling with water efficiently.

Common Symptoms:

  • Dishwasher stops mid‑cycle with E1 displayed
  • Standing water remains in dishwasher bottom
  • Dishwasher fails to drain properly

Possible Causes

  • Blocked or dirty drain filter or drain hose (medium)
  • Faulty or obstructed drain pump (medium)

How to Fix Error E01

DIY Fix Check drainage and clean filter

  1. Turn off and disconnect power to dishwasher.
  2. Open dishwasher and locate the bottom filter assembly.
  3. Remove and rinse the filter under running water to remove debris.
  4. Inspect the drain hose for kinks or debris and clear if accessible.

DIY Fix Verify drain pump operation

  1. Disconnect power to the dishwasher.
  2. Remove lower access panel (if safe and accessible) to locate the drain pump.
  3. Visually inspect for debris around the pump impeller.
  4. If impeller is blocked by debris, carefully clear obstruction.

Technician Only Replace faulty drain pump

  1. Disconnect power and water supply.
  2. Remove dishwasher access panels and disconnect electrical and plumbing connections to drain pump.
  3. Replace with OEM‑specified drain pump assembly.
  4. Reassemble panels and test operation.

Parts needed: Drain pump

🛑 When to Call a Pro:
  • If water is leaking from base or pooling beneath dishwasher
  • If error persists after cleaning filters and hoses
  • If drain pump motor hums but does not spin

Next step

Choose the next step for E01

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E01 error mean on Hisense Dishwasher?

E01 error indicates drainage issues, causing the dishwasher to stop. Symptoms include standing water and failure to drain.

Can I fix Hisense Dishwasher E01 error myself?

Yes, you can check and clean the drain filter and verify the drain pump operation as DIY actions.

How much does it cost to fix E01 error?

Repair costs for E01 error typically range from $70 to $150, including parts and labor.

When should I call a technician for E01?

Call a technician if there is leaking water, the error persists after cleaning, or if the drain pump motor hums but doesn't spin.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!