Haier Air Conditioner Error F20

⚡ Quick Answer: The Haier air conditioner F20 error indicates a high-pressure protection issue within the refrigerant system. This fault can cause erratic temperature... ✅ DIY Fixable

What Does Error F20 Mean?

The Haier air conditioner F20 error indicates a high-pressure protection issue within the refrigerant system. This fault can cause erratic temperature readings and inconsistent cooling performance, often resulting in the unit shutting down unexpectedly. The error typically arises due to over-pressure conditions in the system or related protection faults.

Common Symptoms:

  • Unit displays F20 on indoor unit panel
  • Outdoor unit alarm lights may flash (e.g., 5 times)
  • Cooling performance stops or unit shuts down unexpectedly

Possible Causes

  • System high‑pressure protection activated (medium)
  • Refrigerant circuit issues leading to over‑pressure (medium)

How to Fix Error F20

DIY Fix Basic checks for F20 protection triggers

  1. Turn off the air conditioner and allow it to rest for ~10 minutes.
  2. Check that outdoor unit airflow and surroundings are not obstructed (remove debris and ensure free airflow).
  3. Ensure the unit’s air filters are clean so airflow inside the indoor unit is not restricted.
  4. Verify input power is within normal range (e.g., using a proper supply or stabilizer if voltage fluctuates).

Technician Only Diagnostic and service for pressure protection F20

  1. Measure high‑side and low‑side refrigerant pressures with HVAC gauges.
  2. Inspect outdoor condenser coil for heavy dirt, blockages, or fan motor not operating properly.
  3. Check for refrigerant overcharge/undercharge and adjust/recharge system accordingly.
  4. Test pressure switch and associated sensors for proper operation and replace if defective.
  5. Inspect compressor operation and drive components if abnormal pressure persists.

Parts needed: HVAC gauge set, Refrigerant (type depending on model), Pressure switch/sensor, Outdoor fan motor (if faulty)

🛑 When to Call a Pro:
  • After basic airflow and filter checks, if F20 persists
  • If you lack HVAC tools or experience to measure pressure or handle refrigerants safely
  • If outdoor fan or compressor appears to be malfunctioning

Technical Specifications

wattage N/A
component Indoor Temperature Sensor
resistance 5-10 kOhms
part_number HAIER-SENSOR-001
voltage_rating AC 220V

Common Questions

What does F20 error mean on haier air conditioner?

The F20 error indicates high-pressure protection, leading to shutdown and erratic cooling.

Can I fix haier air conditioner F20 error myself?

Yes, you can check for airflow obstructions and ensure filters are clean.

How much does it cost to fix F20 error?

Repair costs range from ¥5,000 to ¥20,000+, depending on parts and service needed.

When should I call a technician for F20?

Call a technician if the F20 persists after basic checks or if you lack HVAC tools.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!