Haier Air Conditioner Error E0

⚡ Quick Answer: The Haier air conditioner E0 error indicates a failure in the indoor temperature sensor, often linked to incoming power issues like low voltage or exc... ✅ DIY Fixable

What Does Error E0 Mean?

The Haier air conditioner E0 error indicates a failure in the indoor temperature sensor, often linked to incoming power issues like low voltage or excessive consumption. This can result in erratic temperature readings and may prevent the unit from starting or cause it to shut down shortly after starting. In some cases, it could also relate to EEPROM or PCB faults, affecting the unit's normal operation.

Common Symptoms:

  • Air conditioner displays E0 and may not start or stops shortly after starting
  • Occurs on display when the unit cannot operate normally due to detected fault

Possible Causes

  • Incoming power issues (low voltage or excessive power consumption) (medium)
  • EEPROM parameter or indoor PCB configuration fault (medium)

How to Fix Error E0

DIY Fix Check and reset power supply

  1. Turn off the air conditioner and unplug it from the power source
  2. Wait 5–10 minutes to allow capacitors to discharge
  3. Plug the unit back in and restart

Technician Only Inspect PCB and EEPROM connections

  1. Disconnect unit from mains power
  2. Remove indoor unit cover to access control PCB
  3. Check connectors for secure seating and corrosion
  4. Test EEPROM and PCB functions; reprogram or replace PCB if corrupted

Parts needed: indoor main control PCB, EEPROM chip

🛑 When to Call a Pro:
  • Error persists after power reset
  • Visible damage to PCB or connectors
  • Repeated E0 thereafter

Next step

Choose the next step for E0

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

HVAC Control Board

Controls fan, compressor, sensor, and communication functions in the HVAC unit.

Typical part-only price
$90 - $320
DIY difficulty
Hard
Estimated time
45-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Air Conditioner parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Air Conditioner Fin Cleaner

For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.

View maintenance supply
Maintenance supply

Model-Compatible Washable AC Filter

A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Indoor Temperature Sensor
resistance 2-10 kOhms
part_number HAIER-TS-001
voltage_rating 5V DC

Common Questions

What does E0 error mean on haier air conditioner?

E0 error signifies a failure in the indoor temperature sensor and may prevent the AC from operating normally.

Can I fix haier air conditioner E0 error myself?

Yes, try resetting the power supply by unplugging the unit for 5-10 minutes, then restart it.

How much does it cost to fix E0 error?

Repair costs for the E0 error typically range from $100 to $400, depending on the region and model.

When should I call a technician for E0?

Call a technician if the error persists after a power reset, if you see visible damage, or if E0 keeps reappearing.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!