Grundig Washing Machine Error E3
⚡ Quick Answer: The Grundig washing machine E3 error indicates a drainage issue, often resulting in the machine stopping mid-cycle and water remaining in the drum. Th... ✅ DIY Fixable
What Does Error E3 Mean?
The Grundig washing machine E3 error indicates a drainage issue, often resulting in the machine stopping mid-cycle and water remaining in the drum. This error may be linked to problems with the drain pump or filter. If you hear unusual sounds during the spin cycle, it could further confirm a drainage failure. To resolve this, check the drain system and clean out any debris.
Common Symptoms:
- Machine stops mid‑cycle with E3 displayed
- Water may remain in drum if associated with drain/pump issues
Possible Causes
- Possible drain system issue (inferred from community guides for E03 on Grundig models) (low)
How to Fix Error E3
DIY Fix Check for drainage problems
- Unplug the washing machine from power.
- Open the lower front access panel and remove the drain pump filter.
- Clean out any debris (lint, coins, buttons) from the filter.
- Inspect the drain hose for kinks or blockages.
- Reconnect and test a short drain cycle.
Technician Only Inspect and service pump and control electronics
- Test the drain pump motor for electrical continuity and proper operation.
- Check for obstructions in pump housing and impeller.
- Evaluate wiring from control board to pump for faults.
- If E3 is confirmed as control board fault, test/replace control board.
Parts needed: Drain pump assembly, Pump filter, Drain hose, Control board (if required)
- If after basic filter/hoses cleaning the code persists
- If water leaks or unusual noises occur
- If internal electrical faults are suspected
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Grundig 5020000001 |
| voltage_rating | 230V AC |
Common Questions
What does E3 error mean on grundig washing machine?
E3 error indicates a drainage issue, causing the machine to stop mid-cycle and potentially leaving water in the drum.
Can I fix grundig washing machine E3 error myself?
Yes, you can check and clean the drain pump filter and hoses to resolve the E3 error.
How much does it cost to fix E3 error?
Estimated repair costs range from €50 to €250, depending on parts and labor in your region.
When should I call a technician for E3?
Call a technician if the error persists after cleaning, if you notice leaks, or suspect electrical faults.
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!