Grundig Washing Machine Error E2
⚡ Quick Answer: The E2 error code on your Grundig washing machine indicates a drainage issue, often characterized by a humming sound and a water level warning on the ... ✅ DIY Fixable
What Does Error E2 Mean?
The E2 error code on your Grundig washing machine indicates a drainage issue, often characterized by a humming sound and a water level warning on the display. This can disrupt the normal operation of the machine, leading to cycle interruptions. It's essential to check for blockages or kinks in the drain hose and inspect accessible filters for debris before seeking professional help.
Common Symptoms:
- Error E2 displayed on control panel with cycle interruption or machine not operating normally
Possible Causes
- Clogged drain filter
- Faulty drain pump
- Kinked drain hose
How to Fix Error E2
DIY Fix Basic checks for E2 error (general washing machines)
- Power off and unplug the machine
- Check and clean drain hoses for blockages or kinks
- Inspect accessible filters/pump trap for debris
- Ensure door is fully closed and latched
- Try a simple power cycle (unplug ~5 minutes, then restart)
Technician Only Technician diagnosis for persistent E2 condition
- Review official Grundig service documentation for model‑specific codes (if available)
- Inspect drain pump, impeller, and associated harness for faults
- Verify door lock mechanism operation
- Check water inlet system and pressure switches if relevant
- Test control board for fault indicators
Parts needed: drain pump assembly, door lock assembly, pressure/water level sensor, control board (if needed)
- If error persists after basic user‑level checks
- If internal components (pump, sensors, door lock) need inspection
- If model’s official documentation contradicts general guidance
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 100W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Grundig 50200012345 |
| voltage_rating | 230V AC |
Common Questions
What does E2 error mean on grundig washing machine?
The E2 error indicates a drainage issue, often causing cycle interruptions and a humming sound.
Can I fix grundig washing machine E2 error myself?
Yes, you can perform basic checks like cleaning drain hoses and inspecting filters.
How much does it cost to fix E2 error?
Repair costs vary but are typically moderate, depending on parts and labor.
When should I call a technician for E2?
Call a technician if the error persists after your checks or if internal components need inspection.
Sources & References
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!