Gorenje Refrigerator Error E5

⚡ Quick Answer: The Gorenje Refrigerator E5 error indicates a malfunction related to the ambient temperature sensor, which affects the cooling efficiency. Common symp... ✅ DIY Fixable

What Does Error E5 Mean?

The Gorenje Refrigerator E5 error indicates a malfunction related to the ambient temperature sensor, which affects the cooling efficiency. Common symptoms include the E5 code displayed on the control panel, inadequate cooling, and erratic temperature regulation. This issue may arise from a faulty sensor or loose connections.

Common Symptoms:

  • E5 displayed on control panel or display
  • Refrigerator may not cool properly
  • Erratic cycling or temperature regulation issues

Possible Causes

  • Ambient temperature (cabinet) sensor failure (medium)
  • Loose or corroded sensor connector / wiring (medium)

How to Fix Error E5

DIY Fix Power Reset & Visual Check

  1. Unplug the refrigerator from the power outlet for at least 5 minutes.
  2. Plug it back in and observe if the E5 error clears.
  3. Visually inspect around the control panel area for obvious moisture or damage.

Technician Only Inspect & Replace Ambient Temperature Sensor

  1. Disconnect mains power before servicing.
  2. Locate the ambient temperature (NTC) sensor behind the display/control panel or in the refrigerator cabinet.
  3. Inspect and test the sensor resistance against specifications.
  4. Inspect wiring harness and connector for corrosion or damage.
  5. Replace the sensor if it is out-of-spec or physically damaged.
  6. Reassemble and verify whether the E5 code clears during operation.

Parts needed: Ambient temperature (NTC) sensor, Connector/wiring harness (if needed)

🛑 When to Call a Pro:
  • If the E5 code persists after resetting power and inspecting/cleaning connections
  • If there is physical damage to wiring or sensor that cannot be safely repaired at home
  • If there are signs of other component failures (e.g., compressor not running, abnormal noises)

Next step

Choose the next step for E5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 15W
component Evaporator Fan Motor
resistance 30-50 ohms
part_number Gorenje 618043
voltage_rating 220V AC

Common Questions

What does E5 error mean on Gorenje Refrigerator?

E5 error indicates a failure in the ambient temperature sensor, causing cooling issues.

Can I fix Gorenje Refrigerator E5 error myself?

Yes, you can try a power reset and visually inspect connections for moisture or damage.

How much does it cost to fix E5 error?

Repair costs range from ¥4,000 to ¥12,000, depending on parts and labor.

When should I call a technician for E5?

Call a technician if the error persists after a reset or if there are signs of physical damage.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!