Gorenje Refrigerator Error E3

⚡ Quick Answer: The Gorenje Refrigerator error E3 indicates a malfunction in the defrost or evaporator temperature sensor, leading to incorrect temperature readings. ... ✅ DIY Fixable

What Does Error E3 Mean?

The Gorenje Refrigerator error E3 indicates a malfunction in the defrost or evaporator temperature sensor, leading to incorrect temperature readings. Users may notice frost accumulation on the rear wall of the freezer or fridge section, and the defrost cycle may not be functioning properly. This error often arises from sensor failure or damaged wiring.

Common Symptoms:

  • E3 displayed on the fridge’s control panel
  • Frost accumulating on the rear wall of freezer or fridge section
  • Defrost cycle not operating properly

Possible Causes

  • Defrost/evaporator temperature sensor failure or misplacement (medium)
  • Damaged or shorted sensor wiring (medium)

How to Fix Error E3

DIY Fix Basic user checks and safe initial steps

  1. Observe whether frost is accumulating heavily on the back wall of the freezer or fridge section
  2. Unplug the refrigerator for safety and wait a few minutes to reset control electronics
  3. Check that door seals close properly and that vents inside the fridge/freezer are not blocked by food/items

Technician Only Technician-level diagnosis and repair

  1. Unplug the refrigerator and remove the internal rear panel of the freezer to access the evaporator coil
  2. Locate the defrost/evaporator temperature sensor and inspect whether it is correctly clipped to the evaporator coil
  3. Check the sensor wiring harness for breaks, pinches, or loose connectors and test sensor resistance with a multimeter to verify proper NTC behavior
  4. Replace the defrost/evaporator sensor if open, shorted, or out of expected resistance range

Parts needed: Defrost/evaporator NTC sensor, Wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after sensor inspection and replacement
  • If accessing internal panels or electrical testing is beyond your skill level

Next step

Choose the next step for E3

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kOhms
part_number Gorenje 123456789
voltage_rating 220V AC

Common Questions

What does E3 error mean on Gorenje Refrigerator?

E3 indicates a defrost or evaporator sensor malfunction, leading to incorrect temperature readings and frost buildup.

Can I fix Gorenje Refrigerator E3 error myself?

Yes, check for frost accumulation, unplug the fridge to reset, and ensure door seals are intact.

How much does it cost to fix E3 error?

Repair costs range from $30 to $120 for parts, plus technician labor if needed.

When should I call a technician for E3?

Call a technician if the error persists after checking the sensor or if you're uncomfortable with electrical testing.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!