Gorenje Refrigerator Error E1

⚡ Quick Answer: The Gorenje Refrigerator E1 error indicates a malfunction in the temperature sensor, typically the refrigerator compartment's NTC sensor. This results... ✅ DIY Fixable

What Does Error E1 Mean?

The Gorenje Refrigerator E1 error indicates a malfunction in the temperature sensor, typically the refrigerator compartment's NTC sensor. This results in the unit displaying an incorrect temperature or failing to cool properly, often with the compressor running continuously without reaching the set temperature. Potential causes include a defective sensor or issues with the sensor wiring harness and connectors.

Common Symptoms:

  • Error code E1 displayed on fridge panel
  • Refrigerator compartment temperature too warm
  • Compressor runs nearly continuously without achieving set temperature

Possible Causes

  • Defective refrigerator compartment temperature sensor (NTC) (medium)
  • Broken or oxidized sensor wiring harness or poor connector contact (medium)

How to Fix Error E1

DIY Fix Basic checks and simple reset

  1. Unplug the refrigerator from the mains for 5–10 minutes
  2. Plug it back in and observe if E1 clears
  3. Ensure the refrigerator doors seal properly and are fully closed
  4. Check that vents inside the fridge are not blocked by stored items

Technician Only Diagnose and repair temperature sensor circuit

  1. Disconnect power and remove appropriate service panels to access the refrigerator compartment NTC sensor
  2. Inspect and test the NTC sensor resistance with a multimeter (compare with specified resistance at ambient temp)
  3. Check continuity and condition of sensor wiring harness and connectors
  4. Replace faulty NTC sensor or repair wiring as needed
  5. Reassemble and test operation to confirm E1 is resolved

Parts needed: Refrigerator compartment NTC temperature sensor, Wiring harness and connectors

🛑 When to Call a Pro:
  • If error persists after basic reset and sensor circuit inspection
  • If wiring appears damaged or inaccessible without technical expertise
  • If control board may be at fault after sensor/harness checks

Next step

Choose the next step for E1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E1 error mean on Gorenje Refrigerator?

E1 indicates a temperature sensor malfunction, causing improper cooling.

Can I fix Gorenje Refrigerator E1 error myself?

Yes, try unplugging the fridge for 5-10 minutes and check door seals.

How much does it cost to fix E1 error?

Repair costs range from $30 to $120 for sensor and connector parts.

When should I call a technician for E1?

Call if the error persists after a reset or if wiring appears damaged.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!