Gorenje Dishwasher Error F11
⚡ Quick Answer: The Gorenje Dishwasher F11 error signifies a drainage malfunction, preventing proper water removal. This may result in standing water in the tub, unus... ✅ DIY Fixable
What Does Error F11 Mean?
The Gorenje Dishwasher F11 error signifies a drainage malfunction, preventing proper water removal. This may result in standing water in the tub, unusual noises during operation, and failure to drain at the end of the cycle. Common causes include a clogged drain hose, a blocked drain pump impeller, or a defective drain pump itself.
Common Symptoms:
- Water not draining at end of cycle
- Standing water in dishwasher tub
- Error appears during or after cycle when draining should occur
Possible Causes
- Clogged or kinked drain hose (medium)
- Blocked or obstructed drain pump impeller (medium)
- Failed or defective drain pump (medium)
How to Fix Error F11
DIY Fix Check and clear visible blockages in drain path
- Turn off and unplug dishwasher.
- Remove and clean the bottom filter and check for debris.
- Check drain hose for kinks or bends; straighten if found.
- If possible, disconnect hose and blow or flush to clear obstructions.
Technician Only Inspect and service drain pump and related components
- Disconnect dishwasher and access drain pump area.
- Remove any jammed debris from pump housing and check impeller movement.
- Test drain pump electrically for continuity and proper operation.
- Replace drain pump if defective or damaged.
Parts needed: Drain pump, Drain hose, Seals/gaskets if disturbed
- After basic cleaning the error persists
- Signs of water leakage beneath dishwasher
- Unusual noises from pump suggesting mechanical failure
Next step
Choose the next step for F11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F11 error mean on Gorenje Dishwasher?
F11 indicates a drainage fault, often due to a clogged hose or a malfunctioning pump.
Can I fix Gorenje Dishwasher F11 error myself?
Yes, you can check for blockages in the drain path and clean the filter.
How much does it cost to fix F11 error?
Repair costs typically range from $50 to $200, depending on parts and labor.
When should I call a technician for F11?
Contact a technician if the error persists after basic cleaning or if you notice water leakage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!