Gorenje Dishwasher Error F10
⚡ Quick Answer: The Gorenje Dishwasher F10 error indicates a malfunction related to the drain pump, often due to water accumulation in the base or a blockage preventi... ⚠️ Difficulty Varies
What Does Error F10 Mean?
The Gorenje Dishwasher F10 error indicates a malfunction related to the drain pump, often due to water accumulation in the base or a blockage preventing drainage. This issue typically manifests with the F10 code displayed, the dishwasher halting mid-cycle, and water detected in the base tray. Immediate attention is required to resolve drainage issues and prevent further damage.
Common Symptoms:
- F10 displayed on dishwasher panel
- Dishwasher stops mid‑cycle
- Water detected in base tray or cannot drain
Possible Causes
- Water accumulation in base tray / leak detection activated (medium)
- Drain pump blockage or failure (medium)
- Clogged or faulty drain hose/dichting (medium)
How to Fix Error F10
DIY Fix Remove water from base and check drainage
- Turn off and unplug the dishwasher.
- Carefully tip the dishwasher (if freestanding) to drain water from the base.
- Look under trays for standing water and wipe it dry.
- Run a short drain/rinse cycle to check if the error clears.
DIY Fix Clean filters and check for visible debris
- Open dishwasher and remove bottom filter assembly.
- Clear any food debris or foreign objects that could block water flow.
- Reinstall filter and retry a program to see if F10 clears.
Technician Only Inspect and service drain pump and hose
- Disconnect power and water supply.
- Remove access panel and inspect drain pump for blockages and mechanical operation.
- Inspect and test drain hose and seal for integrity and blockages.
- Replace defective pump or hose if necessary.
Parts needed: Drain pump assembly, Drain hose and seals
- If water leak from base is significant or you cannot identify the source of water
- If cleaning filters and preliminary steps do not clear the F10 error
- If drain pump or hose replacement is suspected and you do not have technical experience
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Gorenje 123456789 |
| voltage_rating | 230V AC |
Common Questions
What does F10 error mean on Gorenje Dishwasher?
The F10 error indicates a drainage malfunction, often due to water accumulation in the base.
Can I fix Gorenje Dishwasher F10 error myself?
Yes, you can remove water from the base and clean filters, but ensure to follow safety precautions.
How much does it cost to fix F10 error?
The estimated repair cost for the F10 error ranges from ¥8,000 to ¥25,000, depending on the region.
When should I call a technician for F10?
Call a technician if you cannot locate the water source, or if cleaning does not resolve the error.
Sources & References
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!