Gorenje Dishwasher Error E9
⚡ Quick Answer: The Gorenje Dishwasher E9 error code indicates a drainage failure, typically causing the appliance to stop mid-cycle. Users may notice unusual sounds ... ✅ DIY Fixable
What Does Error E9 Mean?
The Gorenje Dishwasher E9 error code indicates a drainage failure, typically causing the appliance to stop mid-cycle. Users may notice unusual sounds coming from the pump and the program may not complete. This issue could stem from an internal electronic fault or a problem with the overflow/pressure sensor, leading to interruptions during operation.
Common Symptoms:
- Dishwasher stops mid‑cycle when E9 is displayed
- Program may not complete and stops early
Possible Causes
- Internal electronic / control fault (low)
- Overflow / pressure sensor condition (low)
How to Fix Error E9
DIY Fix Basic checks and restart
- Turn off the dishwasher and disconnect power for a few minutes
- Ensure water supply is open and there is no visible leak
- Restart and observe if E9 returns
Technician Only Professional diagnostic of sensors and control board
- Inspect pressure/overflow/float sensors for proper operation
- Check control board connections and look for burnt or damaged components
- If necessary, test and replace the main control board
Parts needed: Pressure / overflow sensor, Main control board, Associated wiring harness
- If the E9 error returns immediately after reset
- If there is visible water where it shouldn’t be or electrical smells
- If internal components have failed during diagnostic
Next step
Choose the next step for E9
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 5-15 ohms |
| part_number | Gorenje 123456789 |
| voltage_rating | 230V AC |
Common Questions
What does E9 error mean on Gorenje Dishwasher?
E9 indicates a drainage failure, stopping the dishwasher mid-cycle and causing unusual pump sounds.
Can I fix Gorenje Dishwasher E9 error myself?
Yes, you can perform basic checks, restart the dishwasher, and ensure there are no leaks.
How much does it cost to fix E9 error?
Repair costs are moderate to high, varying based on model and parts needed.
When should I call a technician for E9?
Call a technician if E9 returns after a reset, if there's visible water, or if components fail during diagnostics.
Sources & References
- Error codes for dishwashers Gorenje (community)
- Dishwasher error codes burning without display (community)
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!