Gorenje Dishwasher Error E6
⚡ Quick Answer: The Gorenje Dishwasher E6 error indicates an issue with the water inlet valve, often leading to insufficient water filling or delayed operation. This ... ✅ DIY Fixable
What Does Error E6 Mean?
The Gorenje Dishwasher E6 error indicates an issue with the water inlet valve, often leading to insufficient water filling or delayed operation. This can be caused by drainage blockages, including kinks in the drain hose or filter obstructions, as well as faults in the water level sensor or pressure switch. Addressing these issues promptly can restore your dishwasher's functionality.
Common Symptoms:
- Dishwasher stops and displays E6 during cycle
- Unit may not fill properly or exhibits erratic filling
- Draining does not occur or is slow/kinked
Possible Causes
- Drainage issue (hose kinked/obstructed or filter/siphon blockage) (medium)
- Water level sensor / pressure switch fault (medium)
How to Fix Error E6
DIY Fix Check and clear drain path
- Turn off and unplug the dishwasher.
- Inspect the drain hose for kinks or sharp bends.
- Remove and clean the dishwasher filter and any visible debris traps.
- Ensure the drain path and siphon area are free of obstructions.
DIY Fix Inspect water level sensor area
- After powering off the machine, open lower access panel.
- Locate any visible float/pressure switch assemblies.
- Check for debris or blockage around the sensor area that may prevent correct operation.
Technician Only Test and replace faulty components
- Perform diagnostic checks on pressure switch / water level sensor circuits.
- Test drain pump operation and motor continuity.
- Replace any failed sensors, pressure switches, or the drain pump assembly if confirmed faulty.
Parts needed: Pressure switch / water level sensor, Drain pump assembly, Associated hoses and connectors
- If drain blockages are not visibly accessible or removable
- If water level/pressure faults persist after clearing drains and sensors
- If error code returns immediately upon restart
Next step
Choose the next step for E6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Water Inlet Valve |
| resistance | 500-1500 ohms |
| part_number | Gorenje 123456789 |
| voltage_rating | 230V AC |
Common Questions
What does E6 error mean on Gorenje Dishwasher?
E6 indicates a problem with water filling, often due to drainage issues or sensor faults.
Can I fix Gorenje Dishwasher E6 error myself?
Yes, you can check for drain kinks and clean the filter, but sensor issues may need professional help.
How much does it cost to fix E6 error?
Repair costs range from ¥5,000 to ¥20,000+, depending on parts and labor.
When should I call a technician for E6?
Call a technician if blockages are inaccessible or if errors persist after DIY checks.
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!