Gorenje Dishwasher Error E5

⚡ Quick Answer: The Gorenje Dishwasher E5 error indicates a water fill issue, preventing the appliance from reaching the required water level during the initial fill ... ✅ DIY Fixable

What Does Error E5 Mean?

The Gorenje Dishwasher E5 error indicates a water fill issue, preventing the appliance from reaching the required water level during the initial fill phase. This can lead to unusual sounds and the dishwasher stopping before the wash cycle due to insufficient water. Common causes include insufficient water supply, a blocked or kinked inlet hose, or a faulty water inlet valve.

Common Symptoms:

  • Error displayed during initial water fill stage
  • Dishwasher stops before starting wash cycle due to insufficient water
  • May be accompanied by flashing lights corresponding to water fill indicator

Possible Causes

  • Insufficient water entering the dishwasher (water supply issue) (medium)
  • Blocked or kinked inlet hose / clogged inlet filter (medium)
  • Faulty water inlet valve or poor electrical connection to it (medium)

How to Fix Error E5

DIY Fix Check water supply and inlet path

  1. Ensure the main water supply tap to the dishwasher is fully open.
  2. Inspect the water inlet hose behind the dishwasher for kinks or bends restricting flow.
  3. Turn off water supply, disconnect hose, and check/clean the inlet filter screen if accessible.

Technician Only Inspect and test water inlet valve and wiring

  1. Disconnect power to the dishwasher.
  2. Test the water inlet valve coil resistance with a multimeter to confirm if it is within manufacturer‑specified values.
  3. Check wiring harness and connectors between inlet valve and control board for continuity and secure connection.
  4. Replace the water inlet valve if coil is open or shows failed readings.

Parts needed: Water inlet valve, Multimeter for electrical testing, Replacement hose/inlet filter parts if damaged

🛑 When to Call a Pro:
  • If after checking water supply and cleaning inlet filters the error persists
  • If the inlet valve shows electrical faults or if there are signs of internal leaks
  • If you are uncomfortable with accessing internal components safely

Next step

Choose the next step for E5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 30W
component Drain Pump
resistance 5-15 ohms
part_number Gorenje 123456789
voltage_rating 230V AC

Common Questions

What does E5 error mean on Gorenje Dishwasher?

E5 indicates a malfunction in the water fill process, preventing proper drainage.

Can I fix Gorenje Dishwasher E5 error myself?

Yes, check the water supply, inspect the inlet hose for kinks, and clean the inlet filter.

How much does it cost to fix E5 error?

Repair costs range from ¥2000 to ¥8000, depending on the part and model.

When should I call a technician for E5?

Call a technician if the error persists after checking water supply or if you can't safely access internal components.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!