Gorenje Dishwasher Error E3
⚡ Quick Answer: The Gorenje Dishwasher E3 error indicates a heating fault, where the unit fails to heat water to the required temperature during the wash cycle. This ... ✅ DIY Fixable
What Does Error E3 Mean?
The Gorenje Dishwasher E3 error indicates a heating fault, where the unit fails to heat water to the required temperature during the wash cycle. This can lead to the dishwasher stopping mid-cycle, poor cleaning results, and longer cycle times. Common causes include a faulty heating element, a malfunctioning temperature sensor or thermostat, and wiring issues. It's essential to address this promptly to ensure effective cleaning performance.
Common Symptoms:
- Dishwasher stops mid‑cycle with E3 displayed
- Cycle times out without reaching higher water temperature
- Poor wash results due to lack of proper water heating
Possible Causes
- Faulty heating element (medium)
- Temperature sensor or thermostat malfunction (medium)
- Wiring/connectivity issue to heater or sensor (medium)
How to Fix Error E3
DIY Fix Basic checks before service
- Turn off and unplug the dishwasher and wait a few minutes.
- Ensure the dishwasher has proper water supply and that inlet filters are not blocked.
- Restart the dishwasher to see if the error persists.
Technician Only Inspect and repair heating system
- Test the heating element resistance with a multimeter and compare to specification.
- Inspect and test the temperature sensor/thermostat for correct function.
- Check wiring harness to heater and sensors for continuity and secure connections.
- Replace faulty components (heater, sensor, wiring) as required.
Parts needed: Heating element, Temperature sensor / thermostat, Wiring harness
- If the error persists after basic checks
- If you are not comfortable accessing internal components
- If visible water leakage or other simultaneous faults appear
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Gorenje 123456789 |
| voltage_rating | 230V AC |
Common Questions
What does E3 error mean on Gorenje Dishwasher?
E3 indicates a heating fault, stopping the cycle and causing poor wash results.
Can I fix Gorenje Dishwasher E3 error myself?
Yes, you can perform basic checks like ensuring water supply and restarting the unit.
How much does it cost to fix E3 error?
Repair costs range from ¥8,000 to ¥25,000 for parts, plus labor.
When should I call a technician for E3?
Call a technician if the error persists after basic checks or if you're uncomfortable accessing internal components.
Sources & References
- Error codes for dishwashers Gorenje (community)
- Gorenje dishwasher errors & fixes (community)
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!