Gorenje Dishwasher Error E2
⚡ Quick Answer: The Gorenje Dishwasher E2 error indicates a malfunction related to the drainage system, often due to an overflow condition or a blockage preventing wa... ✅ DIY Fixable
What Does Error E2 Mean?
The Gorenje Dishwasher E2 error indicates a malfunction related to the drainage system, often due to an overflow condition or a blockage preventing water from draining. Symptoms include water remaining in the bottom of the tub, the wash cycle halting, and indicator lights displaying unusual patterns. This error typically arises from issues with the drain pump, drain hose, or water level sensor.
Common Symptoms:
- Water remains in the bottom of the dishwasher tub
- Wash cycle stops/does not progress when error appears
- Second indicator light flashing with end light solid
Possible Causes
- Excessive water level / overflow condition detected by water level sensor (medium)
- Drainage blockage or failure leading to water not draining (medium)
How to Fix Error E2
DIY Fix Check and clear simple blockages
- Turn off dishwasher and disconnect power
- Open dishwasher and remove/clean bottom filter
- Inspect drain hose for kinks or visible clogs
- Check under sink trap/siphon for blockage if applicable
Technician Only Inspect drainage system and water level sensor
- Disconnect supply and power
- Remove lower access panel
- Test drain pump operation and continuity
- Check water level sensor/floating switch and wiring for proper function
- Verify proper drain hose routing and connection to stand‑pipe/sink drain
Parts needed: Drain pump, Drain hose, Water level sensor/float, Filters
- If water level sensor appears faulty
- If drain pump fails to operate when tested
- If you are uncomfortable performing electrical/mechanical checks
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2 error mean on Gorenje Dishwasher?
E2 error indicates a drainage malfunction, often causing water to remain in the tub.
Can I fix Gorenje Dishwasher E2 error myself?
Yes, you can check for blockages by cleaning the filter and inspecting the drain hose.
How much does it cost to fix E2 error?
$50–$200+ depending on the parts needed and labor costs.
When should I call a technician for E2?
Call a technician if the water level sensor is faulty or if you're uncomfortable performing repairs.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!