Ge Microwave Error PF

⚡ Quick Answer: The GE microwave PF error code signifies a power failure, often occurring after a power outage or when power is restored. This code indicates that the... ✅ DIY Fixable

What Does Error PF Mean?

The GE microwave PF error code signifies a power failure, often occurring after a power outage or when power is restored. This code indicates that the microwave has detected a loss or interruption of electrical power, resulting in a blinking display or unresponsive unit. Until the PF code is cleared, the microwave will not operate normally, and you may notice that the clock or timer is reset or blank.

Common Symptoms:

  • PF appears on display after a power outage or when power is restored
  • Microwave doesn’t operate normally until the PF code is cleared
  • Clock/timer may be reset or blank after PF

Possible Causes

  • Temporary loss of electrical power to the microwave (high)
  • Loose or inconsistent power connection at outlet or circuit (medium)
  • Underlying electrical fault (e.g., outlet, breaker, fuse) causing repeated power interruption (medium)

How to Fix Error PF

DIY Fix Clear the PF Code and Reset Microwave

  1. Press the CLEAR or CLEAR/OFF button on the microwave display to clear the PF code.
  2. Set the correct time on the clock if required by your model.
  3. Test basic microwave functions to confirm normal operation.

DIY Fix Check and Restore Power Supply

  1. Ensure the microwave is securely plugged into a functioning wall outlet (avoid extension cords).
  2. Check your home’s circuit breaker panel for tripped breakers and reset if needed.
  3. Try a different dedicated outlet to rule out outlet issues.

Technician Only Inspect and Repair Electrical Supply and Internal Components

  1. Use a voltage tester to confirm stable power at the microwave’s outlet.
  2. Inspect and, if necessary, replace the home circuit breaker or outlet wiring causing intermittent power.
  3. If persistent PF code remains after power issues are resolved, inspect internal fuses or control board continuity and integrity.
  4. Replace blown internal fuse or failed control board as needed.

Parts needed: voltage tester (diagnostic), replacement fuses, control board (if defective), outlet or breaker components

🛑 When to Call a Pro:
  • PF code persists after clearing and confirmed stable power supply
  • Owner detects burning smell, overheating, or unusual noises
  • Internal inspection is required beyond basic user checks

Technical Specifications

wattage 1000W
component Power Supply Board
resistance 5-10 ohms
part_number GE WB27X10343
voltage_rating 120V AC

Common Questions

What does PF error mean on GE microwave?

PF error indicates a power failure detected by the microwave, often after a power outage.

Can I fix GE microwave PF error myself?

Yes, you can clear the PF code and reset the microwave by pressing the CLEAR button and checking the power supply.

How much does it cost to fix PF error?

Repair costs range from $100 to $400+, depending on parts and labor needed to address the issue.

When should I call a technician for PF?

Call a technician if the PF code persists after clearing, if you smell burning, or if an internal inspection is needed.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!