Frigidaire Refrigerator Error OP-RF

⚡ Quick Answer: The OP-RF error code on your Frigidaire refrigerator indicates a fault in the refrigerant system, particularly related to the temperature sensor (ther... ⚠️ Difficulty Varies

What Does Error OP-RF Mean?

The OP-RF error code on your Frigidaire refrigerator indicates a fault in the refrigerant system, particularly related to the temperature sensor (thermistor) or its wiring. This may manifest as an incorrect temperature reading, unusual sounds, or the refrigerator failing to maintain proper cooling. Addressing this issue promptly is crucial to ensure optimal performance and prevent food spoilage.

Common Symptoms:

  • Code OP-RF appears on the refrigerator temperature display instead of the actual temperature reading
  • Refrigerator temperature may read incorrectly or not regulate properly
  • Refrigerator may show warm conditions despite door being closed

Possible Causes

  • Open or faulty refrigerator temperature sensor (thermistor) (medium)
  • Loose, damaged, or disconnected wiring between the temperature sensor and electronic control board (medium)

How to Fix Error OP-RF

DIY Fix Basic checks and reset

  1. Ensure the refrigerator door is fully closed.
  2. Unplug the refrigerator or turn off its breaker for 60 seconds to reset the display.
  3. Plug it back in and see if the code clears.

Technician Only Inspect and test refrigerator temperature sensor and wiring

  1. Disconnect power to the refrigerator.
  2. Locate the refrigerator temperature sensor (thermistor) inside the fresh food compartment.
  3. Inspect wiring and connectors for damage or loose connections.
  4. Use a multimeter to measure the sensor resistance; verify it is not open and within expected values per model service information.
  5. Repair or replace the temperature sensor or wiring harness if faulty.

Parts needed: Refrigerator temperature sensor (thermistor), Wiring harness between sensor and control board

🛑 When to Call a Pro:
  • If the error persists after sensor and wiring inspection
  • If resistance readings are abnormal and unclear without model-specific specs
  • If there are signs of control board damage

Next step

Choose the next step for OP-RF

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 200W
component Refrigerant System
resistance 5-10 ohms
part_number 5303918276
voltage_rating 120V AC

Common Questions

What does OP-RF error mean on frigidaire refrigerator?

The OP-RF error indicates a problem with the temperature sensor or wiring, leading to incorrect temperature readings.

Can I fix frigidaire refrigerator OP-RF error myself?

Yes, you can try resetting the refrigerator and checking the door seal. If the issue persists, further inspection is needed.

How much does it cost to fix OP-RF error?

Estimated repair costs range from low to moderate, depending on the specific parts and labor required.

When should I call a technician for OP-RF?

Call a technician if the error persists after checking the sensor and wiring, or if you notice signs of control board damage.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!