Frigidaire Dryer Error E25
⚡ Quick Answer: The Frigidaire dryer E25 error code indicates a malfunction in the thermistor, or temperature sensor, leading to improper heating and inconsistent tem... ⚠️ Difficulty Varies
What Does Error E25 Mean?
The Frigidaire dryer E25 error code indicates a malfunction in the thermistor, or temperature sensor, leading to improper heating and inconsistent temperature readings. This can cause the dryer to run without heating or shut off prematurely. It's crucial to address this issue promptly to restore your dryer's functionality.
Common Symptoms:
- Dryer displays E25 on the control panel
- Dryer may run but not heat correctly
- Dryer may shut off prematurely
Possible Causes
- Faulty thermistor (temperature sensor) (high)
- Loose or damaged thermistor wiring or connector (medium)
How to Fix Error E25
DIY Fix Basic checks and reset
- Unplug the dryer from power for safety.
- Check that the exhaust vent and lint filter are clear for proper airflow.
- Re‑plug the dryer and run a test cycle to see if E25 returns.
Technician Only Test and replace thermistor
- Disconnect dryer from power.
- Access the thermistor location (usually near the heater housing or blower housing).
- Visually inspect thermistor wiring and connector for damage.
- Measure thermistor resistance at room temperature with a multimeter.
- If resistance is out of range, replace the thermistor.
- Reassemble and test dryer operation.
Parts needed: Thermistor temperature sensor, Wiring harness/connectors if damaged
- If E25 persists after thermistor replacement and wiring checks
- If there is significant internal damage or corrosion discovered during inspection
Next step
Choose the next step for E25
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Thermistor |
| resistance | 10-15 kOhms |
| part_number | 5304511725 |
| voltage_rating | 120V AC |
Common Questions
What does E25 error mean on frigidaire dryer?
E25 indicates a malfunction in the thermistor, causing heating issues.
Can I fix frigidaire dryer E25 error myself?
Yes, you can perform basic checks and reset the dryer, but replacement may require a technician.
How much does it cost to fix E25 error?
The estimated cost for parts to fix the E25 error is $20-$80, excluding labor.
When should I call a technician for E25?
Call a technician if E25 persists after checks or if significant internal damage is found.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!