Frigidaire Dryer: not heating

Possible Causes

Blown thermal fuse

How to Identify: Dryer tumbles but no heat; continuity test with multimeter shows open circuit at thermal fuse.

Part: Thermal fuse

Faulty thermostat or thermal cutoff

How to Identify: Dryer stops heating prematurely; multimeter shows thermostat may not close at set temperature.

Part: Thermostat/thermal cutoff

Failed heater relay or control board issue

How to Identify: Other causes ruled out; control board not sending power to heating element.

Part: Control board / heater relay

DIY Solutions

Check and reset cycle settings

Easy 5–10 minutes

1. Ensure dryer is set to a heat cycle (e.g., 'Regular'/'Timed Dry' not 'Air Fluff').
2. Run a short cycle to confirm heat output.

Clean lint filter and dryer vent

Moderate 20–45 minutes

Tools Needed: Dryer vent brush, vacuum

1. Unplug dryer and disconnect vent hose.
2. Use dryer vent brush and vacuum to clear lint from exhaust and wall vent.
3. Reconnect vent and run a cycle to test heat.

⚠️ Safety First: Ensure appliance is unplugged before disconnecting vent. Heat build‑up from clogged vents can be fire hazard.

Test/replace thermal fuse

Advanced 30–60 minutes

Tools Needed: Screwdrivers, multimeter, replacement thermal fuse

1. Unplug dryer and access thermal fuse housing.
2. Remove wires and test continuity with multimeter; if open, replace thermal fuse.
3. Reassemble and test dryer operation.

⚠️ Safety First: Disconnect power before starting.

Test/replace heating element

Advanced 60–120 minutes

Tools Needed: Screwdrivers, multimeter, replacement heating element

1. Disconnect power and open dryer back panel.
2. Locate heating element, remove and test for continuity.
3. Replace element if faulty, then reassemble and test heat.

⚠️ Safety First: Ensure correct replacement part.

Professional Repairs

Replace thermostat or thermal cutoff assembly

Estimated Cost: $50 - $150

Control board or heater relay replacement

Estimated Cost: $150 - $400

When to Call a Professional

Multimeter tests inconclusive or unsafe to perform

Visible electrical damage or burning smell

Internal control board fault suspected

Preventive Maintenance

• Clean lint filter: Airflow restriction and overheating issues
  Frequency: after every load
• Clean dryer vent: Blocked airflow leading to heating issues and fire risk
  Frequency: annually

Frequently Asked Questions

Why is my Frigidaire Dryer not heating?

Common causes include a blown thermal fuse, faulty thermostat, or control board issues.

How do I fix Frigidaire Dryer not heating myself?

Check settings, clean the vent, or test/replace the thermal fuse and heating element.

How much does it cost to fix not heating?

Professional repairs range from $50 to $400 depending on the issue.

When should I call a technician for not heating?

Call a technician if DIY solutions don't resolve the issue or if you're uncomfortable with advanced repairs.

References & Sources

• Frigidaire Support: Dryer Not Heating Official

Can I Fix This Myself?

67%

DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

• Heating element failure (2 mentions)
• Gas valve coil malfunction (1 mentions)

User Suggested Solutions

1. Replace the heating element

   Success rate: 20.0%

2. Replace malfunctioning gas valve coil

   Success rate: 20.0%

Community Discussions

washer/dryer laundry is broken

The dryer is confirmed to be electric based on the model number and voltage specifications.

Pro needed View on Reddit →

has power and spins but no heat

Replaced malfunctioning gas valve coil.

DIY View on Reddit →

having problems drying clothes, and throws the E64 heating circuit error

Replace the heating element.

DIY View on Reddit →

Source: Reddit r/appliancerepair