Frigidaire Dryer Error E24

⚡ Quick Answer: The Frigidaire dryer error E24 indicates a malfunction in the thermistor, which is responsible for regulating temperature during drying cycles. When t... ✅ DIY Fixable

What Does Error E24 Mean?

The Frigidaire dryer error E24 indicates a malfunction in the thermistor, which is responsible for regulating temperature during drying cycles. When this error occurs, the dryer may fail to heat properly or may shut down as it cannot accurately sense the temperature. This issue typically stems from a faulty thermistor that needs testing or replacement to restore normal function.

Common Symptoms:

  • Error E24 displayed on control panel or via flashing codes
  • Drying cycles may not heat or may shut down because temperature cannot be regulated properly

Possible Causes

  • Faulty thermistor (temperature sensor) (high)

How to Fix Error E24

DIY Fix Basic check and power reset

  1. Unplug the dryer from power for safety and reset.
  2. Plug the dryer back in and see if E24 returns.

Technician Only Test and replace thermistor

  1. Disconnect power.
  2. Locate thermistor near blower housing/exhaust.
  3. Disconnect thermistor and measure resistance with multimeter; expected ~50,000 ohms at room temperature.
  4. If resistance is outside expected range, replace thermistor.
  5. Reassemble and test dryer for error clearance.

Parts needed: Thermistor (temperature sensor), Multimeter for testing

🛑 When to Call a Pro:
  • If error persists after thermistor replacement and wiring checks
  • If internal access or electrical testing is outside your comfort level

Technical Specifications

wattage 5400W
component Heating Element
resistance 10-30 ohms
part_number 5300622031
voltage_rating 240V AC

Common Questions

What does E24 error mean on frigidaire dryer?

E24 indicates a thermistor malfunction affecting temperature regulation, leading to drying cycles with no heat.

Can I fix frigidaire dryer E24 error myself?

Yes, try resetting the dryer by unplugging it. If E24 returns, further inspection is needed.

How much does it cost to fix E24 error?

The cost for a thermistor replacement is $25–$80, plus variable labor costs.

When should I call a technician for E24?

Call a technician if E24 persists after replacing the thermistor or if you're uncomfortable with electrical testing.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!