Siemens Washing Machine: rattling during spin cycle

Professional Repair Guide

What is this symptom?

Experiencing a rattling or vibrating noise during the spin cycle of your Siemens washing machine? This can occur due to an unbalanced load, improper installation, or foreign objects in the drum. Addressing these issues promptly can help prevent further damage and ensure optimal performance.

Urgency: Medium

Possible Causes

Unbalanced laundry load

How to Identify: Rattling accompanied by excessive vibration and noise primarily when heavy items cluster on one side; noise changes when load is redistributed.

Part: Drum and load distribution

Machine not level or improperly installed

How to Identify: Noise and vibration occur despite balanced load; machine may rock or move slightly; checking with a spirit level shows uneven placement.

Part: Feet/installation surface

Foreign objects in drum or pump

How to Identify: Rattling or clanking that sounds like metal or hard objects hitting while spinning; items like coins or hairpins often discovered during inspection.

Part: Drum interior/drain pump area

Preventive Maintenance

  • Check and level machine feet: Noise due to imbalance or uneven installation
    Frequency: monthly
  • Inspect drum interior for small objects: Foreign objects causing rattling and internal damage
    Frequency: weekly

Frequently Asked Questions

Why is my Siemens Washing Machine rattling during spin cycle?
Common causes include an unbalanced laundry load, improper installation, or foreign objects in the drum.
How do I fix Siemens Washing Machine rattling during spin cycle myself?
Currently, there are no DIY solutions for this issue.
How much does it cost to fix rattling during spin cycle?
There are no professional repair costs listed for this symptom.
When should I call a technician for rattling during spin cycle?
If the issue persists despite adjusting the load or installation, consider calling a technician.

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Worn or damaged shock absorbers
  • Loose or damaged drum support springs
  • Unbalanced load in the drum

User Suggested Solutions

  1. Check the load balance. Open the door and redistribute the clothes evenly in the drum. Run a short spin cycle to see if the rattling persists.

  2. Inspect the shock absorbers for wear or damage. If they are worn, replace them by unscrewing the old ones and installing new ones according to the manufacturer's instructions.

  3. Examine the drum support springs for looseness or damage. Tighten or replace them as necessary. Ensure the machine is unplugged before performing this task.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Siemens IQ700 washing machine rattles when on spin

Community Discussions

rattles when on spin

Try replacing the shock absorbers and checking the springs.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!