Siemens Washing Machine: bouncing during spin cycle

Professional Repair Guide

What is this symptom?

Is your Siemens washing machine bouncing during the spin cycle? This common issue is often caused by an unbalanced load or incorrect leveling, leading to excessive vibration and noise. Addressing these concerns promptly can help prevent further damage and ensure optimal performance.

Urgency: Medium

Important Tips for Siemens Models

  • Official Siemens support emphasizes correct installation and leveling as part of use; specific bouncing troubleshooting guidance not found in manuals but general balance advice applies.

Possible Causes

Unbalanced laundry load

How to Identify: Occurs when heavy items (e.g., towels, bedding cluster on one side of the drum; bounce occurs early in spin.

Part: Laundry load distribution

Incorrect machine leveling

How to Identify: Machine visibly tilts or legs don’t sit evenly on the floor; vibration seems worse on certain floor surfaces.

Part: Adjustable feet / overall machine level

Worn or damaged suspension springs or shock absorbers

How to Identify: Persistent bouncing even with balanced loads and proper leveling; older machines; unusual wobble felt at drum supports.

Part: Suspension springs / dampers

Faulty or worn shock absorbers (drum dampers)

How to Identify: Drum movement feels loose or ‘sloshy’ by hand when machine off and drum rocked; vibration not corrected by load distribution.

Part: Shock absorbers / dampers

Poor drainage leading to water imbalance

How to Identify: Spin starts but water isn’t fully removed; bounce occurs alongside water leftover signs or error codes.

Part: Drain filter/hose

DIY Solutions

Redistribute laundry load

Easy 5–10 minutes
  1. Pause machine mid‑cycle or stop the current spin.
  2. Open drum and evenly redistribute laundry, mixing heavy and light items.
  3. Restart the spin cycle.
⚠️ Safety First: Always turn off the machine before opening the door mid‑cycle if permitted.

Level the washing machine

Moderate 15–30 minutes
Tools Needed: Leveling tool or smartphone level app, Wrench or pliers for adjusting feet
  1. Use a level tool to check machine is horizontal.
  2. Adjust each adjustable foot until the machine sits level and stable on the floor.
  3. Run a short spin test to confirm reduced vibration.
⚠️ Safety First: Ensure machine is unplugged or off during adjustment.

Inspect and replace worn suspension/shock components

Advanced 30–60 minutes
Tools Needed: Screwdrivers, Socket set, Replacement springs/shock absorbers specific to model
  1. Unplug machine and remove front/back panel as required.
  2. Locate suspension springs and shock absorbers.
  3. Compare condition to new parts and replace worn/damaged components.
  4. Reassemble and test with balanced load.
⚠️ Safety First: Ensure power is disconnected.

Next step

Choose the next step for bouncing during spin cycle

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Appliance Leveling Leg

Supports and levels the appliance to reduce rocking, vibration, and door-alignment problems.

Typical part-only price
$8 - $40
DIY difficulty
Easy
Estimated time
10-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Washer Shock Absorber

Dampens tub movement and vibration during high-speed spin cycles.

$25 - $100 · Medium · 45-90 mins

Check fit & price
Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply
Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply
Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Shock absorber/suspension replacement by technician

Estimated Cost: $80–$200

Drum balance and internal assembly realignment

Estimated Cost: $100–$250

When to Call a Professional

Persistent bouncing after redistributing loads and leveling
Internal noise beyond normal operation
Visible wear or damage to suspension components
Error codes indicating mechanical imbalance

Preventive Maintenance

  • Check and adjust leveling: Vibration and bouncing during spin
    Frequency: monthly or after machine moves
  • Clean drain filter and hose: Poor drainage imbalance leading to uneven spin
    Frequency: monthly

Frequently Asked Questions

Why is my Siemens Washing Machine bouncing during spin cycle?
Common causes include an unbalanced laundry load, incorrect leveling, or worn shock absorbers, leading to excessive vibrations.
How do I fix Siemens Washing Machine bouncing during spin cycle myself?
Redistribute the laundry evenly, check and adjust the machine's level, or inspect suspension components for wear.
How much does it cost to fix bouncing during spin cycle?
Professional repairs can range from $80 to $250, depending on whether shock absorbers or internal assembly need service.
When should I call a technician for bouncing during spin cycle?
Consider professional help if DIY fixes don't resolve the issue, or if you suspect damaged internal components.

References & Sources

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • Unbalanced load in the drum
  • Worn or damaged suspension springs
  • Faulty shock absorbers

User Suggested Solutions

  1. Redistribute the load evenly in the drum. Open the door, rearrange the clothes to ensure they are balanced, and try running the spin cycle again.

  2. Inspect and replace the suspension springs if they are worn or damaged. This involves removing the outer casing of the washing machine to access the springs.

  3. Check the shock absorbers for any signs of wear or damage. If faulty, replace them by detaching the old ones and installing new ones, ensuring proper alignment.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Need to replace suspension on washer?

Community Discussions

instability/bouncing during the spin cycle

Replace suspension if it bounces excessively after pressing down.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318