Samsung Washing Machine: vibrating during spin cycle
What is this symptom?
Is your Samsung washing machine vibrating excessively during the spin cycle? This common issue often arises from an unbalanced load or improper leveling. The washer may shake, thump, or even move, especially at high speeds. Addressing the root causes can help restore stability and performance to your appliance.
Important Tips for Samsung Models
- Samsung official troubleshooting specifically s improper leveling and unbalanced load as main causes for washer shaking during spin. (Samsung TechWin)search
Possible Causes
Unbalanced laundry load
How to Identify: Vibration decreases or stops when load is redistributed evenly; single heavy item (towels/jeans cause imbalance
Part: Drum and suspension system
Washer not level or feet not properly adjusted
How to Identify: Washer rocks by hand, or one foot does not firmly touch the floor; vibration persists even with balanced load
Part: Leveling feet
Worn or damaged suspension/shock absorbers
How to Identify: Vibration remains after load balancing and leveling; machine shakes violently and seems uncontrolled
Part: Shock absorbers / suspension springs
Shipping/transport bolts not removed (new installation)
How to Identify: Vibration from first uses after installation; bolts still visible in rear panel
Part: Transport bolts
Uneven or soft floor surface
How to Identify: Floor may flex under load; vibration reduces when moved to firmer surface or placed on anti‑vibration mat
Part: Installation surface
DIY Solutions
Redistribute laundry load
- Pause the washer mid‑cycle if safe.
- Open the door and redistribute items so heavy items are spread evenly around the drum.
- Avoid washing single heavy items alone; mix with other items.
Level the washer
- Use a bubble level on top of washer to check level front‑to‑back and side‑to‑side.
- Adjust each leveling foot so unit sits flat; tighten lock nuts once level.
- Recheck level and run a spin test.
Remove shipping/transport bolts (if newly installed)
- Unplug machine and pull away from wall.
- Locate and remove all transport bolts from rear per manual instructions.
- Store bolts for future transport and reposition washer.
Place anti‑vibration pads or mat
- Slide anti‑vibration pads under each washer foot or place an anti‑vibration mat beneath unit.
- Check stability and run a spin test.
Next step
Choose the next step for vibrating during spin cycle
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
- Typical part-only price
- $25 - $100
- DIY difficulty
- Medium
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace suspension/shock absorbers
Service drum bearings or spider arm (if worn)
When to Call a Professional
Preventive Maintenance
-
Check & adjust leveling feet: Excessive vibration and movement
Frequency: every 6 months -
Clean drum and check for foreign objects: Unbalanced loads due to trapped items
Frequency: monthly
Frequently Asked Questions
Why is my Samsung Washing Machine Vibrating during spin cycle?
How do I fix Samsung Washing Machine Vibrating during spin cycle myself?
How much does it cost to fix Vibrating during spin cycle?
When should I call a technician for Vibrating during spin cycle?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Unbalanced load due to uneven distribution of clothes
- Worn or damaged shock absorbers
- Faulty suspension springs
User Suggested Solutions
-
Redistribute the load evenly in the drum. Remove some items if necessary for balance. Run a test spin cycle to check for vibrations.
-
Inspect and replace worn or damaged shock absorbers. This involves removing the back panel, disconnecting the old shock absorbers, and installing new ones.
-
Check and replace faulty suspension springs. This requires lifting the machine, removing the drum, and replacing the springs if they are worn out.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!