Samsung Washing Machine: not playing specified end of cycle tone
What is this symptom?
Is your Samsung washing machine failing to play the end-of-cycle tone? This common issue can manifest as a quiet, absent, or seemingly disabled sound that normally indicates the completion of your laundry cycle. Understanding the potential causes and solutions can help you restore the melody and ensure your washer functions as intended.
Important Tips for Samsung Models
- Samsung washers often include user toggles for end‑of‑cycle melody or silent modes; this can lead to no sound if set off.
Possible Causes
End‑of‑cycle melody/sound setting disabled in control settings
How to Identify: No tune plays at cycle end while other functions operate normally and no error codes are present. User may have toggled a mute or sound off setting.
Part: Control panel settings / sound menu
Machine in silent/mute mode
How to Identify: Machine may show a mute icon or sound indicator off; no audio feedback for any alerts or tones.
Part: Control panel / sound toggle
Factory default or user changed sound configuration
How to Identify: Settings menu may list states like Melody Off or Alarm Off; varies by display type.
Part: Sound settings within machine software
DIY Solutions
Enable end‑of‑cycle sound in settings
- Power on the washing machine and access the control panel.
- Navigate to Sound or Alarm settings (methods vary by model).
- Ensure end‑of‑cycle sound or melody is set to On rather than Off or Silent.
- Save settings and run a short cycle to test if sound plays.
Disable silent/mute mode
- Check if a mute icon or indication appears on display.
- On many Samsung models, press and hold the appropriate button combination (e.g., Rinse + Spin for LED models) for ~3–5 seconds to toggle sound back on. (coolblue.be
- Verify that sound icons disappear and run a cycle to confirm.
Next step
Choose the next step for not playing specified end of cycle tone
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Browse by model — no specific failed part is claimed
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Control board or speaker module issue
When to Call a Professional
Preventive Maintenance
-
Check sound settings when first installing the machine: Unexpected muted end‑of‑cycle tone due to default settings
Frequency: once at setup -
Occasionally review control panel settings: Accidental toggling of sound settings
Frequency: monthly
Frequently Asked Questions
Why is my Samsung Washing Machine not playing specified end of cycle tone?
How do I fix Samsung Washing Machine not playing specified end of cycle tone myself?
How much does it cost to fix not playing specified end of cycle tone?
When should I call a technician for not playing specified end of cycle tone?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- The washing machine's sound settings are turned off or set to silent mode.
- The end of cycle tone feature is disabled in the machine's settings.
- A malfunctioning control board or software issue preventing the tone from playing.
User Suggested Solutions
-
Check the sound settings: Access the control panel and navigate to the sound settings. Ensure that the volume is turned up and not set to silent mode.
-
Enable the end of cycle tone: Refer to the user manual to find how to enable or disable the end of cycle tone feature. Adjust the settings accordingly.
-
Reset the washing machine: Unplug the machine for a few minutes and then plug it back in. This may resolve any temporary software glitches.
-
Inspect the control board: If the above solutions do not work, inspect the control board for any visible damage or loose connections. If necessary, consult a professional.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
not playing The Trout song
Not all Samsung washers play The Trout; check the manual or customer support for confirmation.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!