Samsung Washing Machine: not completing cycle
What is this symptom?
Is your Samsung washing machine not completing its cycle? This common issue may cause your washer to stop unexpectedly during wash, rinse, or spin phases. Understanding the potential causes can help you identify the problem and find a solution.
Possible Causes
Unbalanced or overloaded laundry load
How to Identify: Machine stops mid‑cycle often during spin, display may show imbalance codes (e.g., dc; heavy or uneven load distribution present.
Part: Drum load distribution / imbalance sensors
Next step
Choose the next step for not completing cycle
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Browse by model — no specific failed part is claimed
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Preventive Maintenance
-
Clean drain filter and hoses: Drainage blockages causing mid‑cycle stops
Frequency: monthly -
Avoid overloading and balance loads: Imbalance related stop mid‑cycle
Frequency: Every use -
Inspect water inlet screens: Water supply issues
Frequency: annually
Frequently Asked Questions
Why is my Samsung Washing Machine not completing cycle?
How do I fix Samsung Washing Machine not completing cycle myself?
How much does it cost to fix not completing cycle?
When should I call a technician for not completing cycle?
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Blocked or kinked drain hose
- Faulty door latch or door switch
- Malfunctioning pressure switch
User Suggested Solutions
-
Inspect the drain hose for kinks or blockages. Ensure it is properly connected and not submerged in water. Clear any obstructions and test the machine again.
-
Check the door latch and door switch for proper operation. If the door does not close securely, replace the door latch. If the switch is faulty, replace it as well.
-
Test the pressure switch for functionality. If it is stuck or malfunctioning, replace the pressure switch to ensure the machine can detect water levels correctly.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
won’t complete a normal cycle correctly
Check the hose leading to the pressure switch for a blockage.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!