Samsung Washing Machine: excessive vibration during spin cycle

Possible Causes

Unbalanced load or unevenly distributed laundry

How to Identify: Large or heavy items bunched to one side; vibration decreases when redistributing laundry.

Part: Laundry load

Machine not level or feet not adjusted

How to Identify: Washing machine rocks when hand-pressed at corners; not all feet solid on floor.

Part: Leveling legs

Worn or damaged suspension parts (springs/rods/snubber pads)

How to Identify: Vibration persists despite balanced load and level floor; internal dampers visibly worn/cracked.

Part: Suspension rods/springs/snubber ring/pads

Foreign objects inside drum or trapped between tubs

How to Identify: Rattling noises; small items (coins found after inspection.

Part: Drum interior

Internal component wear or loose parts

How to Identify: Persistent vibration, loud banging/grinding noises under all conditions.

Part: Internal mechanical parts

DIY Solutions

Redistribute laundry load

Easy 2-5 minutes

1. Stop machine and open door
2. Rearrange laundry to be evenly distributed, avoid overloading or heavy items on one side
3. Restart spin cycle

⚠️ Safety First: Ensure machine has stopped fully before reaching inside

Level the washing machine

Moderate 10-15 minutes

Tools Needed: wrench, level tool

1. Unplug washer
2. Adjust each leveling foot so all feet contact floor
3. Use a level to ensure front-to-back and side-to-side balance
4. Tighten locking nuts if present

⚠️ Safety First: Disconnect power before adjusting

Remove foreign objects from drum

Easy 5 minutes

1. Stop machine and open door
2. Visually inspect drum for coins or small objects
3. Remove any objects found and restart

⚠️ Safety First: Power off before reaching inside

Professional Repairs

Replace suspension springs or shock absorbers

Estimated Cost: $50 - $200

Internal drum or mechanical component repair

Estimated Cost: $150 - $400+

When to Call a Professional

After trying balanced load and leveling with no improvement

If loud banging/grinding noises occur during spin

Visible wear or damage to suspension parts

Preventive Maintenance

• Regularly check and adjust leveling feet: Vibration due to uneven floor or shifting over time
  Frequency: monthly
• Inspect drum for foreign objects before washing: Damage and imbalance during spin
  Frequency: every wash

Frequently Asked Questions

Why is my Samsung Washing Machine excessive vibration during spin cycle?

Common causes include unbalanced loads, uneven leveling, and worn suspension parts.

How do I fix Samsung Washing Machine excessive vibration during spin cycle myself?

Redistribute laundry evenly, level the washer, or remove foreign objects from the drum.

How much does it cost to fix excessive vibration during spin cycle?

Professional repairs can range from $50 to $400+, depending on the issue.

When should I call a technician for excessive vibration during spin cycle?

Call a technician if DIY solutions don't work, or if suspension parts need replacement.

References & Sources

• Samsung washing machine is shaking Official

Can I Fix This Myself?

100%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

• Busted counterweights (1 mentions)
• Worn spider assembly or bearings (1 mentions)

User Suggested Solutions

1. Replaced spider assembly, bearings, and shocks

   Success rate: 50.0%

2. Replace busted counterweights

   Success rate: 50.0%

Community Discussions

louder and louder vibration during the spin cycle

Replaced spider assembly, bearings, and shocks after disassembling the washer.

DIY View on Reddit →

vibrates excessively during spin cycle, timer doesn't count down, repeats spin cycle

Counterweights are likely busted; replacing them may be a solution.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair