Samsung Induction Cooktop: not heating properly

Professional Repair Guide

What is this symptom?

Experiencing issues with your Samsung Induction Cooktop not heating properly? This common problem may involve intermittent or insufficient heating across one or multiple burners, even when the desired temperature is set. Understanding potential causes, such as incompatible cookware or power setting issues, is essential for effective troubleshooting.

Urgency: Medium

Important Tips for Samsung Models

Samsung official support notes troubleshooting steps for one burner not working and general temperature issues; service may be needed if initial checks fail.

Possible Causes

Incompatible cookware

How to Identify: Cookware fails the magnet test (a magnet does not stick to the bottom; pan size does not match the designated induction zone.

Part: Cookware

Power settings or user control issues

How to Identify: Controls set too low for required heating; user lock or control lock activated preventing heat application.

Part: User interface / settings

Cooktop overheating or power cycling

How to Identify: Cooktop shuts down heating after prolonged high power use, then resumes after cooling.

Part: Internal thermal protection system

Electrical supply or connection issues

How to Identify: Cooktop shows flickering lights, inconsistent power, tripped breaker, or outlet issues.

Part: Power supply / wiring

DIY Solutions

Verify and use proper induction‑compatible cookware

Easy 5 minutes

Tools Needed: Magnet

Test your current cookware base with a magnet; if it doesn't stick, replace with induction‑compatible cookware (magnetic stainless steel or cast iron).
Ensure the cookware diameter matches the cooktop zone and is centered on it for proper magnetic coupling.

⚠️ Safety First: Do not use converter discs or adapters as they reduce performance and may pose safety issues. (

Check and adjust power settings and controls

Easy 2 minutes

Ensure the cooktop is not in child lock or control lock mode.
Increase the power level appropriately for the cooking task and confirm the correct burner zone is selected.

⚠️ Safety First: Avoid prolonged high heat that might trigger thermal protection.

Reset the cooktop

Easy 10 minutes

Turn off the induction cooktop completely.
Unplug it from the power source and wait 5–10 minutes.
Plug it back in and power it on to clear minor software errors.

⚠️ Safety First: Ensure the power is fully disconnected before resetting.

Next step

Choose the next step for not heating properly

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Model number required

Browse by model — no specific failed part is claimed

Model-compatible Induction Cooktop parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Enter your complete model number for compatible results

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Replace faulty induction coil or control electronics

Estimated Cost: $150 - $400+

Electrical supply or internal wiring repair

Estimated Cost: $100 - $250

When to Call a Professional

Persistent non‑heating after verifying proper cookware and power settings

Error codes displayed on the cooktop that DIY reset does not clear

Unusual noises, burning smells, or visible damage to cooktop components

Preventive Maintenance

Clean cooktop surface and verify cookware regularly: Residue buildup that can affect cookware contact and heating efficiency
Frequency: after each use
Inspect power cord and outlet periodically: Loose connections and power interruptions leading to heating problems
Frequency: monthly

Frequently Asked Questions

Why is my Samsung Induction Cooktop not heating properly?

Common causes include incompatible cookware, power setting issues, or overheating.

How do I fix Samsung Induction Cooktop not heating properly myself?

Check cookware compatibility, adjust power settings, or reset the cooktop.

How much does it cost to fix not heating properly?

Professional repairs range from $150 to $400+ for faulty coils or electronics.

When should I call a technician for not heating properly?

If DIY solutions fail or if electrical issues are suspected, contact a technician.

References & Sources

One burner on the cooktop does not work - Samsung Support Official

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

Faulty induction coil or burner element
Incompatible cookware
Control board malfunction

User Suggested Solutions

Check and replace the induction coil if necessary. Unplug the cooktop, remove the burner cover, and inspect the coil for damage. Replace if burnt out or damaged.
Test cookware compatibility. Ensure that the pots and pans used are induction-compatible (magnetic). Replace any non-compatible cookware.
Inspect and reset the control board. Check for any visible damage or loose connections. Reset the cooktop by unplugging it for a few minutes and then plugging it back in.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources