Samsung Induction Cooktop: error code
What is this symptom?
If your Samsung Induction Cooktop displays an error code on the control panel, it may indicate issues such as sensor faults, communication errors, or pan detection problems. This error often renders the cooktop unresponsive, disrupting your cooking experience. Common codes include C0–C3 and F0–F2, signaling various malfunctions that may require troubleshooting or professional repair.
Important Tips for Samsung Models
- Official Samsung documentation defines codes C0–C3 as sensor errors, d0 as stuck button, F0–F2 as communication errors, and pan detection errors requiring proper cookware. Other codes may require support center assistance. (
Possible Causes
Sensor or temperature related fault
How to Identify: Codes like C0, C1, C2, C3 indicate sensor errors or over‑temperature conditions; surface may overheat or not heat correctly. (
Part: Temperature sensor / internal sensors
Stuck or continuously detected button
How to Identify: d0 error appears when a button is continuously detected as pressed; often seen if control surface is wet or debris on panel. (
Part: Touch control panel
Communication error between internal PCBs
How to Identify: F0, F1, F2 or CE variants indicate communication failures between control boards. Persistent faults after reset suggest hardware link or PCB issue. (
Part: Control PCB / inverter or touch PCB
Pan detection or incompatible cookware
How to Identify: Underlined 'u' or pan detection error indicates the cooktop cannot detect suitable cookware; magnet test fails. (
Part: Induction coil / sensor interface
Specific module faults (e.g., Inverter fan, IGBT sensors)
How to Identify: Codes like A2 or bo are documented on community error lists as indicating fan or IGBT sensor faults. (
Part: Inverter fan / IGBT sensor
DIY Solutions
Power Reset to Clear Temporary Errors
- Turn off the induction cooktop using the Power button.
- Switch off power at circuit breaker or unplug the appliance.
- Wait 30–60 seconds to allow internal electronics to reset.
- Restore power and attempt to power on the cooktop.
Check and Correct Cookware Compatibility
- Place a magnet on the bottom of your cookware; if it sticks strongly, cookware is induction compatible.
- Use correctly sized cookware centered on the cooking zone.
- Avoid cookware that is warped or non‑magnetic.
Clean and Dry Control Panel
- Turn off and cool down the cooktop.
- Wipe the touch panel with a dry cloth to remove moisture or debris.
- Ensure no pressure remains on buttons and try to restart.
Next step
Choose the next step for error code
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Induction Heating Coil
Generates electromagnetic energy to heat pots and pans directly.
Model-compatible Induction Cooktop parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Professional Repairs
Replace Faulty Control Board or Communication Harness
Sensor Replacement (Temperature or IGBT)
When to Call a Professional
Preventive Maintenance
-
Regularly clean cooktop surface and control panel: Stuck button errors or erroneous sensor readings
Frequency: weekly -
Use induction compatible cookware: Pan detection related errors
Frequency: Every use
Frequently Asked Questions
Why is my Samsung Induction Cooktop error code?
How do I fix Samsung Induction Cooktop error code myself?
How much does it cost to fix error code?
When should I call a technician for error code?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Overheating due to prolonged use or insufficient ventilation.
- Incompatible cookware that is not induction-compatible.
- Faulty internal components such as the control board or sensors.
User Suggested Solutions
-
Ensure proper ventilation and allow the cooktop to cool down. Check for any obstructions around the unit.
-
Verify that you are using induction-compatible cookware. Look for the induction symbol on the bottom of pots and pans.
-
Inspect the cooktop for any visible damage or error codes. If the error persists, consider resetting the cooktop by unplugging it for a few minutes.
-
If the error code continues, contact a professional to check for faulty components such as the control board or sensors.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!