Miele Washing Machine: not secured for transport

Professional Repair Guide

What is this symptom?

Is your Miele Washing Machine indicating it's still secured for transport? This common issue often arises before initial use or after resetting electronics. The machine may remind you to remove transit bars or bolts that prevent proper operation. Follow our guide to resolve this quickly.

Urgency: Medium

Important Tips for Miele Models

  • Persistent reminders about removing transport bars may require running initial commissioning wash even after bolts are removed.

Possible Causes

Transit bolts or transport bars still installed

How to Identify: Visible large bolts at rear/front of machine intended to secure drum; message or reminder appears to remove them

Part: Transit bolts/transport bars

Control system not completed initial commissioning after removing bolts

How to Identify: Reminder remains in display despite bolts removed; machine hasn’t run a commissioning cycle

Part: Control electronics/program state

DIY Solutions

Remove transit bolts/transport bars

Moderate 10–20 minutes
Tools Needed: wrench or socket set
  1. Locate transit bolts at the back/front of the machine typically through holes securing drum
  2. Use correct wrench to unscrew each bolt and remove completely
  3. Install supplied plastic blanking caps into the bolt holes
  4. Store bolts safely for future transport
⚠️ Safety First: Ensure machine is unplugged before accessing rear

Run initial commissioning wash cycle

Easy 60+ minutes
  1. Ensure all transit bolts are removed
  2. Load suitable laundry or follow manual’s initial-use instructions
  3. Start a continuous wash cycle to complete initial commissioning and clear reminder
⚠️ Safety First: Do not start heavy load if unsure bolts fully removed

Professional Repairs

Inspection and removal of hidden transport fasteners

Estimated Cost: $80 - $150

When to Call a Professional

If transport reminder persists after removal of all bolts and completing initial commissioning cycle
If machine makes excessive vibration or unusual noises even after bolt removal

Preventive Maintenance

  • Check and remove all transit bolts when installing or relocating machine: Display reminder and potential internal damage from operating with bolts installed
    Frequency: Once at installation or after moving house

Frequently Asked Questions

Why is my Miele Washing Machine not secured for transport?
Your Miele washing machine may still have transit bolts installed or the control system hasn't completed initial commissioning.
How do I fix Miele Washing Machine not secured for transport myself?
Remove the transit bolts using a wrench and run an initial commissioning wash cycle to ensure proper operation.
How much does it cost to fix not secured for transport?
Professional repairs can cost between $80 and $150 to inspect and remove hidden transport fasteners.
When should I call a technician for not secured for transport?
If you've removed the bolts and the issue persists, or you're uncomfortable performing the fix, contact a technician.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

85%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Transit rods were not reinserted after previous use
  • User is moving the washing machine without proper preparation
  • Missing or damaged transit rods

User Suggested Solutions

  1. Reinsert the transit rods: 1) Locate the transit rods (part number 9175102). 2) Tilt the washing machine slightly to access the rear. 3) Insert the transit rods into the designated holes. 4) Secure them tightly to ensure stability during transport.

  2. If transit rods are missing, purchase replacements: 1) Check the Miele parts website or authorized dealer for part number 9175102. 2) Order the rods and follow the reinstallation steps mentioned above.

  3. Prepare the washing machine for transport: 1) Disconnect all hoses and power. 2) Secure the door with tape to prevent opening. 3) Use moving blankets to protect the appliance during transport.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Is it possible to reinsert transport rods in Miele W1 washin...

Community Discussions

moving without transit rods

Transit rods can be reinserted with assistance; part number is 9175102.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!