Miele Washing Machine: excessive shaking during spin cycle
What is this symptom?
Experiencing excessive shaking during the spin cycle of your Miele washing machine? This common issue may cause vibrations, noise, and movement. Typically related to improper leveling, load imbalances, or suspension problems, addressing these factors can restore smooth operation and prevent potential damage.
Important Tips for Miele Models
- Official guidance highlights removal of transport safety device and proper leveling.
Possible Causes
Machine not level / uneven installation
How to Identify: Machine rocks easily by hand or feet aren’t uniformly touching floor; vibrations decrease when machine is pushed down.
Part: Leveling feet and floor surface
Transport safety devices still installed
How to Identify: Machine shakes violently during first uses after installation and shipping bolts not removed.
Part: Shipping/transport bolts
Load imbalance/uneven laundry distribution
How to Identify: Vibration occurs inconsistently and lessens when load is more even; heavy/thick items cause issues.
Part: Laundry load distribution
Worn or faulty suspension/dampers
How to Identify: Persistent vibration after leveling and balancing loads; internal component wear signs (noise, uneven motion.
Part: Shock absorbers / suspension rods / springs
Internal balance ring / counterweight issues
How to Identify: Vibration severe and persistent despite correct load and leveling; machine moves significantly.
Part: Balance ring / counterweights
DIY Solutions
Level the washing machine
- Place bubble level on top of machine to check level
- Adjust each leveling foot by turning until machine is stable and level all around
- Tighten counter nuts against housing once level is achieved
Redistribute laundry load
- Stop the cycle when safe and open door
- Evenly distribute laundry inside drum
- Avoid washing only heavy items alone; mix sizes to balance load
Remove transport safety devices (if new)
- Check rear of machine for shipping bolts
- Use proper tool to unscrew and remove all bolts
- Store bolts for future transport
Next step
Choose the next step for excessive shaking during spin cycle
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
- Typical part-only price
- $25 - $100
- DIY difficulty
- Medium
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Washer Suspension Rod Kit
Supports and stabilizes the washer tub during agitation and spin.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace worn suspension/dampers
Balance ring or counterweight repair
When to Call a Professional
Preventive Maintenance
-
Check machine level periodically: Vibration due to uneven installation
Frequency: monthly -
Avoid overloading or underloading: Load imbalance vibration
Frequency: Every use
Frequently Asked Questions
Why is my Miele Washing Machine excessive shaking during spin cycle?
How do I fix Miele Washing Machine excessive shaking during spin cycle myself?
How much does it cost to fix excessive shaking during spin cycle?
When should I call a technician for excessive shaking during spin cycle?
References & Sources
- Miele Washer Vibrations During Spinning Official
- Miele Vibrations UK Support Official
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Unbalanced load due to improper loading of clothes
- Washer not level on the floor
- Worn or damaged shock absorbers or suspension springs
User Suggested Solutions
-
Redistribute the load evenly inside the drum. Ensure that heavy items are balanced with lighter items.
-
Check and adjust the leveling feet of the washer. Use a level to ensure the machine is perfectly horizontal.
-
Inspect and replace worn shock absorbers or suspension springs if necessary. This may require disassembling parts of the washer.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
stacked washer shakes too much
Reduce spin speed, check leveling, use vibration damping feet, and ensure proper load size.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!