LG Washing Machine: vibrating

Possible Causes

Unbalanced or uneven laundry load

How to Identify: Vibration occurs intermittently depending on load type/size, heavy items clump on one side

Part: Laundry load distribution

Washer not level or unstable installation

How to Identify: Washer rocks when pushed on corners, uneven floor surface observed

Part: Leveling feet/floor

Worn or damaged suspension components (springs/shock absorbers)

How to Identify: Persistent vibration despite balanced load and level floor; visible wear or leaks on shocks

Part: Shock absorbers, suspension springs/rods

Shipping bolts or packing material not removed (new installs)

How to Identify: Excessive vibration on new installation; shipping bolts still present

Part: Shipping bolts/foam block

Worn tub bearings or drum support issues

How to Identify: Grinding or scraping noises along with vibration

Part: Tub bearings

DIY Solutions

Balance laundry load properly

Easy 5-10 minutes

1. Stop the washer mid-cycle
2. Redistribute the clothes evenly around the drum, mixing heavy and light items

⚠️ Safety First: Run machine only with balanced loads to avoid damage

Level the washing machine

Moderate 15-30 minutes

Tools Needed: Level tool, Wrench

1. Place a level on top of washer to check for levelness
2. Adjust each leveling foot until the machine is stable and level
3. Tighten lock nuts on feet when level is achieved

⚠️ Safety First: Ensure machine is unplugged when adjusting footing to avoid tipping

Inspect and replace worn shock absorbers/springs

Advanced 60-120 minutes

Tools Needed: Screwdrivers, Socket set

1. Unplug washer and tilt or access back panel
2. Inspect shock absorbers and suspension springs for wear or leaks
3. Replace any worn or damaged components with OEM parts

⚠️ Safety First: Disconnect power before working inside unit

Remove shipping bolts/packing material (for new installs)

Easy 10 minutes

Tools Needed: Wrench included with machine

1. Locate and remove shipping bolts from the rear of washer
2. Remove any foam block used for transport
3. Insert hold caps into bolt holes after removal

⚠️ Safety First: Have assistance when tilting washer to check underneath

Next step

Choose the next step for vibrating

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Washer Shock Absorber

Dampens tub movement and vibration during high-speed spin cycles.

Typical part-only price

$25 - $100

DIY difficulty

Medium

Estimated time

45-90 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply

Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply

Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace tub bearings or drum support assembly

Estimated Cost: $150 - $350

Inspect and repair internal balance weights or motor mount issues

Estimated Cost: $120 - $300

When to Call a Professional

Persistent vibration after correct load balancing and leveling

Loud grinding noises indicating possible bearing failure

Electrical or sensor error codes (e.g., vibration sensor error)

Preventive Maintenance

• Check and adjust leveling regularly: Vibration due to uneven floors or settling
  Frequency: quarterly
• Inspect suspension components after heavy years of use: Long-term wear causing vibration
  Frequency: annually

Frequently Asked Questions

Why is my LG Washing Machine vibrating?

Common causes include unbalanced loads, unstable installation, and worn suspension components.

How do I fix LG Washing Machine vibrating myself?

Balance the load, level the machine, or check for shipping bolts if newly installed.

How much does it cost to fix vibrating?

Professional repairs range from $120 to $350 depending on the issue.

When should I call a technician for vibrating?

If DIY fixes don't resolve the issue or if you suspect serious internal damage.

References & Sources

• LG Washer – Troubleshooting Vibration Issues Official

Common Issues Reported by Users

• Shock absorbers failure (1 mentions)
• Rotor or stator issues (1 mentions)

User Suggested Solutions