Lg Washing Machine: OE error, not draining

Professional Repair Guide

What is this symptom?

Experiencing an OE error with your LG washing machine? This indicates that your machine is unable to drain water effectively, often resulting in water standing in the drum. The OE error typically appears during or after a wash cycle when the drain cycle fails to remove water in the allotted time. Understanding the common causes can help you address the issue swiftly.

Urgency: Medium

Possible Causes

Clogged or kinked drain hose

How to Identify: Visible bends, kinks, or obstructions in the hose; water not flowing out; hose placement too high relative to drain.

Part: Drain hose

Incorrect drain hose height or installation

How to Identify: Hose placed too high or against installation guidelines; water struggles to exit.

Part: Drain hose installation

Preventive Maintenance

  • Clean drain pump filter regularly: Clogs that lead to OE drain errors
    Frequency: every 2-3 months
  • Inspect drain hose placement: Kinks or improper hose height that impede drainage
    Frequency: periodically

Frequently Asked Questions

Why is my LG Washing Machine OE error, not draining?
The OE error usually occurs due to a clogged or kinked drain hose, preventing proper water drainage.
How do I fix LG Washing Machine OE error, not draining myself?
Currently, there are no DIY solutions available for this error.
How much does it cost to fix OE error, not draining?
Repair costs can vary based on the technician's rates and parts needed, but no specific costs are listed.
When should I call a technician for OE error, not draining?
If the issue persists after checking the drain hose, it's advisable to call a technician for further assistance.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

  • Clogged drain hose
  • Faulty drain pump
  • Blocked filter or debris in the filter housing

User Suggested Solutions

  1. Check and clear the drain hose: Disconnect the hose from the back of the washing machine and inspect for any clogs. Use a long object to push through any blockages, then reconnect the hose.

  2. Inspect and replace the drain pump: Remove the front panel of the washing machine to access the drain pump. Test the pump for continuity with a multimeter, and replace if faulty.

  3. Clean the filter: Locate the filter (usually at the front bottom of the machine), remove it, and clean out any debris. Ensure the filter is properly reinstalled.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. LG Washing Machine OE Error – Solved (Drain Pump Jammed)

Community Discussions

OE error on display, drum full of water, drain pump making faint noise

Cleared a jam in the drain pump caused by clothing material.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!