LG Washing Machine: not turning
What is this symptom?
Is your LG washing machine not turning on or failing to spin? You may experience unresponsive controls and no drum rotation. This issue could be due to power supply problems, an unbalanced load, or more complex internal faults. Understanding the root cause can help you resolve the issue effectively.
Important Tips for LG Models
- LG washers often have integrated door lock safety systems; if the machine detects an open door or failed lock it will not start.
Possible Causes
Power supply issues
How to Identify: No power indicators or lights, no response when power button pressed, other appliances also may not power on at the same outlet.
Part: Power outlet / circuit breaker
Unbalanced load or overloaded drum
How to Identify: Washer stops or will not spin when load is uneven or too heavy.
Part: Wash load/drum balance system
Control board or electrical internal fault
How to Identify: No lights, no response after checking power and safety interlocks; component may show burn marks.
Part: Main control board
DIY Solutions
Check power and reset breaker
- Ensure the washer is plugged into a working outlet.
- Test the outlet with another appliance (e.g., hair dryer).
- Check the home’s circuit breaker panel and reset any tripped breakers.
- Plug the washer back in and attempt to power on.
Verify door/lid is fully closed and latch functioning
- Open and firmly close the washer door/lid until it clicks.
- Inspect for debris or clothing caught in the door seal preventing closure.
- Try starting the cycle again.
- If model has child lock, ensure it is disabled.
- If door still reports open, the door lock switch may need replacement.
Reduce/unload laundry to balance load
- Open the door and remove excess laundry.
- Redistribute items evenly around the drum.
- Close door and restart cycle.
Test and replace blown fuse
- Disconnect power to the washer.
- Locate the thermal or line fuse per model service manual.
- Use multimeter to check continuity.
- If open, replace with exact part number.
- Reassemble and test washer.
Next step
Choose the next step for not turning
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace door lock assembly
Replace drive motor or belt
Control board diagnosis and repair
When to Call a Professional
Preventive Maintenance
-
Check and clean door seal and latch regularly: Door lock interlock failures
Frequency: monthly -
Avoid overloading drum: Unbalanced load stopping spin
Frequency: each use
Frequently Asked Questions
Why is my LG Washing Machine not turning?
How do I fix LG Washing Machine not turning myself?
How much does it cost to fix not turning?
When should I call a technician for not turning?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Power supply issue (outlet not working or tripped circuit breaker)
- Door latch malfunction (door not securely closed or faulty latch)
- Control board failure (electronic control board malfunction)
User Suggested Solutions
-
Check the power supply: Ensure the washing machine is plugged in, and check the outlet with another device. If the outlet is not working, reset the circuit breaker.
-
Inspect the door latch: Open and close the door firmly to ensure it is latched properly. If the door latch is broken, replace it with a new one.
-
Examine the control board: If the previous solutions do not work, check for visible damage on the control board. If damaged, replace the control board.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
stopped turning
Consider Electrolux or Speed Queen for reliable service and longevity.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!