Lg Washing Machine: not spinning properly

Professional Repair Guide

What is this symptom?

Experiencing issues with your LG washing machine not spinning properly? This common problem may leave your clothes wet at the end of a wash cycle. An unbalanced load, clogged drainage, or faulty components can disrupt the spin cycle. Understanding these causes can help you troubleshoot effectively.

Urgency: Medium

Important Tips for Lg Models

  • LG support specifically recommends selecting proper Spin or Rinse + Spin program and notes that soak-only or wash-only cycles may not include a spin step. (A-Tech Appliance Parts & Service)0search1
  • Door lock detection prevents spin; failed lock may trigger error codes on LG front-loaders. (A-Tech Appliance Parts & Service)0search11

Possible Causes

Unbalanced or overloaded load

How to Identify: Symptom triggered when washing large/heavy items alone or clumped to one side; machine may rock or vibrate excessively at start of spin. (A-Tech Appliance Parts & Service0search

Part: User load distribution

Drainage failure (clogged pump/filter/hose)

How to Identify: Water remains in drum after wash; suspected clog when washer won’t enter spin until water removed. (A-Tech Appliance Parts & Service0search

Part: Drain pump and hoses

Faulty door lock/lid switch

How to Identify: Machine refuses to spin if door not fully locked; may show door error code prior to spin. (A-Tech Appliance Parts & Service0search

Part: Door lock/latch switch

Worn/broken drive belt

How to Identify: Drum doesn’t spin despite power and correct settings; may hear motor noise without drum movement. (A-Tech Appliance Parts & Service0search

Part: Drive belt

Motor coupling or stator/rotor failure

How to Identify: Washer fills and drains normally but won’t spin; unusual noises may accompany. (A-Tech Appliance Parts & Service0search

Part: Motor coupling or motor assembly

DIY Solutions

Redistribute and reduce load

Easy 5–10 minutes
  1. Pause cycle and open door.
  2. Remove or rearrange clothes for even distribution.
  3. Restart a dedicated Spin or Rinse + Spin cycle per LG guidance. (A-Tech Appliance Parts & Service)0search1
⚠️ Safety First: Do not open door during spin; power off before handling laundry.

Clear drain pump/clogged hoses

Moderate 15–30 minutes
Tools Needed: Towels, bucket, screwdriver if needed
  1. Unplug washer.
  2. Locate drain pump filter (check manual).
  3. Remove blockages from pump filter and drain hose.
  4. Reassemble and run a Spin cycle. (A-Tech Appliance Parts & Service)0search19
⚠️ Safety First: Disconnect power before access.

Check/replace door lock switch

Moderate 30–60 minutes
Tools Needed: Screwdriver, multimeter optional
  1. Unplug washer.
  2. Access door lock assembly.
  3. Check latch and switch operation; replace if faulty.
  4. Reassemble and test spin. (A-Tech Appliance Parts & Service)0search11
⚠️ Safety First: Ensure power is off. Handle wiring carefully.

Inspect and replace drive belt

Advanced 60–90 minutes
Tools Needed: Screwdrivers, wrench set
  1. Unplug and tilt washer (with help).
  2. Remove rear panel.
  3. Inspect belt for wear.
  4. Replace belt if worn.
  5. Reassemble and test. (A-Tech Appliance Parts & Service)0search17
⚠️ Safety First: Disconnect power and avoid pinch points.

Professional Repairs

Drain pump or motor assembly replacement

Estimated Cost: $150–$400

Control board or sensor repair

Estimated Cost: $200–$500+

When to Call a Professional

Persistent error codes related to motor or electronics
Loud unusual noises during spin
Unable to drain water or access internal components

Preventive Maintenance

  • Balance loads properly: Spin cycle imbalance issues
    Frequency: Every wash
  • Clean drain pump filter: Drain clogs that block spin
    Frequency: Monthly

Frequently Asked Questions

Why is my LG Washing Machine not spinning properly?
Common causes include an unbalanced load, clogged drainage, or a faulty door lock.
How do I fix LG Washing Machine not spinning properly myself?
Redistribute the load, clear the drain pump, or check the door lock for issues.
How much does it cost to fix not spinning properly?
Professional repairs can cost between $150 to $500+, depending on the issue.
When should I call a technician for not spinning properly?
Call a technician if DIY fixes don't resolve the issue or if complex repairs are needed.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

50%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Overloading the washer (1 mentions)
  • Faulty pump or circuit board (1 mentions)

User Suggested Solutions

  1. Reduce load size or fold bedding properly

    Success rate: 33.0%
Analysis based on 2 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Can't put bedding linen in washing machine without the machi...
  2. LG washer gets to the spin cycle and just does a super slow ...

Community Discussions

stops when washing bedding linen

Reduce load size, fold bedding properly, or use a slower spin cycle.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!