LG Washing Machine: not spinning correctly
What is this symptom?
Is your LG washing machine not spinning correctly? This issue may manifest as failure to reach full spin speed, stopping mid-spin, or leaving clothes wet after the cycle. Common causes include unbalanced loads, faulty door locks, or drainage issues. Understanding these problems can help you troubleshoot effectively.
Important Tips for LG Models
- LG washers have sensors that detect imbalance and water level; improper load handling often triggers spin cancellation.
- Front‑load LG washers require proper door lock detection; latch wear is a known frequent issue causing spin refusal.
Possible Causes
Unbalanced or overloaded laundry load
How to Identify: Washer vibrates, rocks, or repeatedly stops spin cycle; heavy items clumped to one side.
Part: Load distribution
Faulty door latch/door lock or lid switch
How to Identify: No click when closing door/lid, unit doesn’t detect closed door and won’t enter spin; possible related error codes.
Part: Door latch/switch assembly
Drainage problems (clogged pump/filter or hose)
How to Identify: Water remains in drum at end of cycle, machine cancels spin, visible clogs in filter or hose.
Part: Drain pump/filter/drain hose
Drive belt wear or breakage
How to Identify: Drum doesn’t spin but motor tries to run; belt visible wear or slack on inspection.
Part: Drive belt
Motor coupling or motor/stator failure
How to Identify: No drum movement despite power; motor may hum or fail motor continuity tests.
Part: Motor coupling, motor/stator assembly
Faulty suspension/springs causing excessive imbalance
How to Identify: Washer rocks excessively, spin repeatedly interrupts due to imbalance.
Part: Suspension rods/springs
DIY Solutions
Redistribute and reduce laundry load
- Stop the washer mid‑cycle or open the door when safe.
- Evenly distribute clothes around the drum.
- Remove some items if overloaded and restart spin cycle.
Clean drain pump filter and check drain hose
- Unplug the washer and place towel/ container under drain access.
- Open drain filter cover and slowly drain water.
- Clean any lint/debris from filter and inspect hose for blockages.
- Reinstall filter, plug in washer, and test spin cycle.
Check and replace door latch/lock or lid switch
- Unplug washer, open access panel to door lock area.
- Inspect latch/switch for damage or loose wiring.
- Test switch for continuity with multimeter (optional).
- Replace faulty door lock/lid switch assembly with model‑specific part.
- Reassemble and test spin cycle.
Next step
Choose the next step for not spinning correctly
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Drain pump replacement and internal clog clearing
Motor or stator assembly repair/replacement
Control board or electronic component diagnosis
When to Call a Professional
Preventive Maintenance
-
Regularly clean drain filter and inspect hoses: Clogs that lead to spin cancellation
Frequency: monthly -
Avoid overloading and balance loads: Unbalanced loads that interrupt spin cycle
Frequency: Every wash
Frequently Asked Questions
Why is my LG Washing Machine not spinning correctly?
How do I fix LG Washing Machine not spinning correctly myself?
How much does it cost to fix not spinning correctly?
When should I call a technician for not spinning correctly?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Unbalanced load causing the machine to knock and not spin properly
- Worn or damaged drive belt affecting spin cycle performance
- Faulty lid switch preventing the machine from spinning
User Suggested Solutions
-
Redistribute the load evenly inside the drum. Remove some items if the load is too heavy or unbalanced. Run a spin cycle to test.
-
Inspect the drive belt for wear or damage. Replace the belt if it appears frayed or broken. Refer to the user manual for instructions.
-
Check the lid switch for proper function. If it's faulty, replace it with a new one. Ensure the machine is unplugged before attempting repairs.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
knocking during spin cycle
Suggestions include balancing the load, using mesh bags for sheets, and avoiding top speed spin.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!