LG Washing Machine: mold buildup

Professional Repair Guide

What is this symptom?

Experiencing mold buildup in your LG washing machine? Look for visible black spots or a musty odor inside the drum and on the door gasket. This issue often stems from detergent residue, trapped moisture, or infrequent cleaning cycles. Taking action can restore freshness and efficiency to your appliance.

Urgency: Medium

Important Tips for LG Models

  • LG official support recommends regular tub clean cycles, cleaning detergent dispenser, door gasket, and drain pump filter to prevent odor/buildup
  • If odor continues after multiple tub cleans, service is required

Possible Causes

Residual detergent, fabric softener, and organic debris buildup inside drum and dispenser areas leaving nutrients for mold growth

How to Identify: Sticky residue visible in detergent drawer and drum surfaces, odors after washing

Part: Drum interior and detergent dispenser

Moisture trapped in door gasket and other crevices due to leaving the door closed after cycles

How to Identify: Black mold spots around gasket folds and persistent musty smell

Part: Door gasket (rubber seal)

Poor draining or clogged drain pump filter leading to standing water

How to Identify: Water remains in drum after cycle, sludge or debris in filter

Part: Drain pump filter

Infrequent "Tub Clean" or maintenance cycle allowing buildup over time

How to Identify: Absence of regular maintenance cycle use, buildup even after washing

Part: Entire internal drum system

DIY Solutions

Run a dedicated washing machine cleaning cycle or hot wash

Easy 60 minutes
Tools Needed: Washing machine cleaner or suitable cleaning agent
  1. Remove laundry from drum
  2. Add recommended washing machine tub cleaner (or oxygen-based bleach according to LG guide)
  3. Run the tub clean or hottest water cycle available; repeat monthly for prevention
⚠️ Safety First: Do not mix bleach with other chemicals

Clean door gasket and detergent drawer

Moderate 20-30 minutes
Tools Needed: Soft cloth, Warm water, Suitable cleaner (oxygen-based bleach or enzyme cleaner)
  1. Pull back door gasket folds and wipe thoroughly to remove debris and mold
  2. Remove detergent drawer and rinse under warm water to clear residue
  3. Dry gasket and drawer thoroughly before next use
⚠️ Safety First: Avoid harsh chemicals that can damage gasket material

Clear drain pump filter

Moderate 15-30 minutes
Tools Needed: Towel, Bucket or shallow tray
  1. Locate filter access panel at bottom front
  2. Place towel and tray to catch water
  3. Unscrew and remove filter, clean debris and rinse
  4. Replace filter securely
⚠️ Safety First: Expect water to spill when opening filter

Next step

Choose the next step for mold buildup

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Door Gasket

Creates a watertight seal around the door to prevent leaks during operation.

$45 - $110 · Medium · 30-60 mins

Check fit & price
Possible related component

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

$35 - $80 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply
Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply
Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Deep professional internal cleaning

Estimated Cost: $150 - $300

When to Call a Professional

Persistent mold and odor after multiple deep cleaning cycles
Signs of mechanical draining issues (water not draining properly)
Damage to gasket or internal parts observed

Preventive Maintenance

  • Run tub clean cycle: Detergent and mold buildup
    Frequency: monthly
  • Wipe gasket and leave door open after use: Moisture and mold growth
    Frequency: After each wash
  • Clean detergent drawer weekly: Residue accumulation
    Frequency: weekly
  • Clean drain pump filter: Standing water and debris
    Frequency: every few months

Frequently Asked Questions

Why is my LG Washing Machine mold buildup?
Mold buildup is commonly caused by detergent residue, moisture trapped in the door gasket, and infrequent cleaning cycles.
How do I fix LG Washing Machine mold buildup myself?
You can run a tub cleaning cycle, clean the door gasket and detergent drawer, and clear the drain pump filter to resolve mold issues.
How much does it cost to fix mold buildup?
Professional repairs for deep cleaning mold buildup can cost between $150 and $300.
When should I call a technician for mold buildup?
Consider calling a technician if DIY solutions don't resolve the issue or if you notice persistent problems with drainage.

References & Sources

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • High humidity and poor ventilation in the laundry area
  • Using too much detergent, leading to residue buildup
  • Leaving the door closed after use, trapping moisture inside

User Suggested Solutions

  1. Leave the washing machine door open after each use to allow airflow and drying. Clean the rubber door seal with a mixture of equal parts water and vinegar to remove any mold. Run a hot water cycle with no clothes and add a cup of bleach to kill any remaining mold spores.

  2. Use the correct amount of high-efficiency (HE) detergent as per the manufacturer's guidelines. Run a cleaning cycle with a washing machine cleaner or vinegar monthly to prevent buildup.

  3. Improve ventilation in the laundry area by using a dehumidifier or ensuring proper airflow. Consider installing a vent or using a fan to reduce humidity levels.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Help me find a new washer that washes well on cold and won't...

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318