LG Washing Machine: loud noises
What is this symptom?
Is your LG washing machine making loud noises like banging, grinding, or thumping? These disruptive sounds during agitation or spinning may indicate serious issues such as an unbalanced load, an unstable machine, or even foreign objects stuck in the drum. Identifying and addressing the root cause can prevent further damage and restore peace to your laundry routine.
Important Tips for LG Models
- LG documentation notes that some noise during spin can be normal if load is off‑center and offers guidance on balancing loads.
Possible Causes
Unbalanced load or uneven clothing distribution
How to Identify: Noise during spin or agitation accompanied by machine rocking or vibrating; loud thumping noise.
Part: Laundry load
Machine not level or unstable placement
How to Identify: Rattling, banging noise with movement of machine; visible wobble when pushing lightly on top.
Part: Leveling feet / installation
Foreign object (coins, metal) in drum or pump
How to Identify: Clicking/grinding noise that changes with drum rotation speed; may stop when object lodged removed.
Part: Drum interior or pump trap
Worn tub bearings or seal failure
How to Identify: Deep rumbling or grinding sounds increasing with spin speed; noise persists regardless of load balance.
Part: Tub bearings / seal
Suspension/damper or shock absorber failure
How to Identify: Thumping or banging noise during spin, machine moves excessively; less noise with lighter loads.
Part: Suspension/shock absorbers
Drive belt wear or misalignment
How to Identify: Squeaking or slapping noise at varied speeds; irregular belt movement visible at rear panel.
Part: Drive belt
Water pump blockage or failure
How to Identify: Gurgling or loud whirring noise especially during drain cycle.
Part: Water pump and filter
DIY Solutions
Redistribute laundry load
- Pause machine and open door
- Rearrange clothes evenly inside drum ensuring balanced distribution
- Resume cycle
Level the washing machine
- Unplug machine and empty drum
- Use level to check machine orientation
- Adjust leveling feet height until machine is stable and level
- Tighten feet locks and test operation
Remove foreign objects from drum or pump
- Turn off and unplug machine
- Inspect drum interior and edge for foreign objects
- Access and clean pump filter (refer to manual) removing debris
- Reassemble and test
Next step
Choose the next step for loud noises
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
- Typical part-only price
- $25 - $100
- DIY difficulty
- Medium
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace tub bearings and seal
Replace suspension/shock absorbers
Water pump repair or replacement
When to Call a Professional
Preventive Maintenance
-
Check and remove foreign objects from clothes before washing: Noise from objects hitting drum or pump
Frequency: Each load -
Clean pump filter regularly: Pump blockage noise
Frequency: Every 1–3 months -
Ensure machine is level: Vibration and noise
Frequency: After relocation or on installation
Frequently Asked Questions
Why is my LG Washing Machine loud noises?
How do I fix LG Washing Machine loud noises myself?
How much does it cost to fix loud noises?
When should I call a technician for loud noises?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged bearings
- Unbalanced load or improper loading
- Faulty motor coupler
User Suggested Solutions
-
Check and redistribute the load in the drum. Ensure clothes are evenly distributed and not overloaded. Run a spin cycle to see if the noise persists.
-
Inspect the bearings for wear. If they are damaged, you will need to replace them. This typically involves disassembling the washer drum.
-
Examine the motor coupler for any signs of wear or damage. If faulty, replace it by removing the motor and installing a new coupler.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!