Lg Washing Machine: loud noise, door movement during spin

Professional Repair Guide

What is this symptom?

Are you experiencing loud banging noises and noticeable door movement during the spin cycle of your LG washing machine? This common issue often arises from unbalanced loads, uneven installation, or foreign objects in the drum. Addressing these problems promptly can help prevent further damage and ensure your washer operates smoothly.

Urgency: Medium

Important Tips for Lg Models

Official LG troubleshooting includes adjusting legs and checking for foreign objects in the tub as primary steps for spin noise.(LG Electronics

Possible Causes

Unbalanced load

How to Identify: Noise and banging primarily occur when clothes are unevenly distributed, loudest during highâ€‘speed spin.

Part: Drum/load distribution

Machine not level / uneven installation

How to Identify: Washer rocks or is visibly off horizontal; noise persists across cycles even with balanced loads.

Part: Adjustable feet / installation

Foreign objects in drum

How to Identify: Metallic rattling or clicking noises; physical inspection may reveal coins, metal pieces stuck in drum or between tub and outer casing.

Part: Drum interior

Worn or damaged suspension/shock absorbers

How to Identify: Persistent large vibration and banging even with balanced loads and level installation.

Part: Suspension springs/shock absorbers

Tub bearing wear or failure

How to Identify: Loud grinding or rumbling noise that changes with drum rotation speed and persists regardless of load balance.

Part: Tub bearings / seal kit

DIY Solutions

Redistribute laundry load

Easy 5-10 minutes

Pause the wash cycle.
Open the door and redistribute clothes evenly around the drum to avoid clustering on one side.
Restart the cycle to see if noise decreases.

Level the washing machine

Moderate 10-20 minutes

Tools Needed: wrench or adjustable spanner, spirit level

Stop and unplug the washer.
Adjust the height of each adjustable foot so the machine sits level on the floor using a spirit level.
Tighten the lock nuts on each foot and test for wobble by gently pushing the machine.

⚠️ Safety First: Ensure machine is unplugged before adjusting feet.

Remove foreign objects from the drum

Easy 5-15 minutes

Tools Needed: flashlight

Stop the machine and open the door.
Inspect the drum and the space between drum and tub for loose objects (coins, buttons).
Remove any debris found and restart the cycle.

⚠️ Safety First: Do not reach into drum while it is spinning.

Professional Repairs

Replace suspension/shock absorbers

Estimated Cost: $50 - $150

Replace tub bearings and seals

Estimated Cost: $150 - $300

When to Call a Professional

If noise and movement persist after balancing load and leveling the machine

If grinding or unusual metal sounds occur irrespective of load distribution

If DIY inspection reveals internal component damage

Preventive Maintenance

Check for balanced load before spin: Noise and vibration from unbalanced loads
Frequency: Every wash
Level washer feet: Instability and spin noise
Frequency: Monthly check

Frequently Asked Questions

Why is my LG Washing Machine loud noise, door movement during spin?

Common causes include unbalanced loads, uneven installation, and foreign objects in the drum.

How do I fix LG Washing Machine loud noise, door movement during spin myself?

Redistribute laundry, level the machine, or remove any foreign objects in the drum.

How much does it cost to fix loud noise, door movement during spin?

Professional repairs range from $50 to $300 depending on the issue.

When should I call a technician for loud noise, door movement during spin?

If DIY fixes donâ€™t resolve the issue or if you suspect wear on suspension parts.

References & Sources

LG Washer - Troubleshooting Noises During the Cycle Official

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Unbalanced load causing excessive vibration
Worn or damaged door latch or hinges
Faulty suspension system or shock absorbers

User Suggested Solutions

Redistribute the load evenly in the drum. Ensure that heavy items are balanced with lighter ones to prevent excessive vibration during the spin cycle.
Inspect and replace the door latch or hinges if they are worn or damaged. Ensure the door closes securely to prevent movement during spin.
Check the suspension system and shock absorbers for wear. Replace any faulty components to stabilize the drum during operation.