LG Washing Machine: error code UE, continuous rinsing, unusual noise during spin, extended cycle time
What is this symptom?
Is your LG washing machine displaying the UE error code? This issue often arises during or before the spin cycle, leading to continuous rinsing, unusual noises, and extended cycle times. Common causes include an unbalanced load, leveling issues, or potential faults in the suspension system. Addressing these problems promptly is key to restoring your washer's performance.
Important Tips for LG Models
- UE code specifically indicates unbalanced load error in LG washers; LG manuals recommend redistributing laundry and proper loading for large items like duvets.
Possible Causes
Unbalanced laundry load
How to Identify: UE error usually appears with uneven laundry distribution, heavy single items (e.g., blankets or mixed heavy/light items clumped on one side; noise during spinning and repeated rinsing/rebalancing cycles.
Part: Drum and load distribution
Washer not level or feet improperly adjusted
How to Identify: Machine vibrates excessively, moves on the floor, UE errors persist despite redistributing load; checking with a level shows uneven placement.
Part: Leveling legs/structure
Faulty suspension/shock absorbers
How to Identify: Continuous noise during spin even after load balanced and level; washer shakes violently; imbalance persists.
Part: Shock absorbers/suspension rods
Faulty Hall sensor or motor speed sensing issue
How to Identify: UE error remains after balancing loads and mechanical checks; spin never reaches correct speed; possible inconsistent readings.
Part: Hall sensor/motor sensor
Control board or electronic fault
How to Identify: UE error displays without clear imbalance; resets don’t clear error; other errors present.
Part: Main control board
DIY Solutions
Redistribute laundry for balance
- Pause the cycle and open the washer door.
- Rearrange clothes evenly around the drum, avoiding heavy items on one side.
- Remove or add items to avoid overloading or underloading.
- Restart the washer and allow it to proceed through spin.
Level the washing machine
- Use a bubble level to check machine level side-to-side and front-to-back.
- Adjust the leveling legs by turning to raise or lower corners until level.
- Test by running a spin cycle with a small load to check reduction in vibration.
Reset washer electronics
- Turn off the washer and unplug it from power.
- Wait 5-10 minutes to allow the control board to fully reset.
- Plug washer back in and select a Rinse & Spin cycle.
- Observe whether the UE error returns.
Next step
Choose the next step for error code UE, continuous rinsing, unusual noise during spin, extended cycle time
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Appliance Leveling Leg
Supports and levels the appliance to reduce rocking, vibration, and door-alignment problems.
- Typical part-only price
- $8 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
Washer Suspension Rod Kit
Supports and stabilizes the washer tub during agitation and spin.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace suspension/shock absorbers
Replace Hall sensor or motor components
Control board repair or replacement
When to Call a Professional
Preventive Maintenance
-
Level the washer when installed: UE imbalance and excessive vibration
Frequency: Once at setup and when moved -
Load laundry with balanced item distribution: Unbalanced load errors and extended rinse cycles
Frequency: Every wash
Frequently Asked Questions
Why is my LG Washing Machine error code UE, continuous rinsing, unusual noise during spin, extended cycle time?
How do I fix LG Washing Machine error code UE, continuous rinsing, unusual noise during spin, extended cycle time myself?
How much does it cost to fix error code UE, continuous rinsing, unusual noise during spin, extended cycle time?
When should I call a technician for error code UE, continuous rinsing, unusual noise during spin, extended cycle time?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Unbalanced load causing UE error and extended rinse cycles
- Faulty or clogged drain pump leading to continuous rinsing
- Worn or damaged suspension rods affecting spin cycle performance
User Suggested Solutions
-
Redistribute the load evenly in the drum. Remove some items if the load is too heavy. Run a spin cycle to see if the UE error clears.
-
Check the drain pump for clogs. Remove the drain filter and clean it. Inspect the drain hose for kinks or blockages.
-
Inspect and replace the suspension rods if they are worn or damaged. This may require disassembling the washer to access the rods.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!