Lg Refrigerator: not working
What is this symptom?
If your LG refrigerator is not working, you may experience a complete lack of operation, including no cooling, lights, or sounds from the fans and compressor. This issue could indicate a power supply problem or potential internal component failure.
Important Tips for Lg Models
- Official LG troubleshooting recommends checking power cord, circuit breaker, and dedicated circuit before other repairs.
Possible Causes
Power supply or electrical issue
How to Identify: No lights, display, or sounds; verify outlet and breaker; inspect cord damage.
Part: Power cord, outlet, circuit breaker
Control board or internal electronics failure
How to Identify: No response despite power present (lights on but no compressor/fans start; may show error codes if panel exists.
Part: Main control board/electronics
Compressor or cooling system failure
How to Identify: Fridge runs lights/fans but fails to cool and compressor not cycling; humming or clicking sounds possible.
Part: Compressor/relay
Door switch or sensor failure
How to Identify: Lights or fans may not run due to false open‑door signal; check door fully closed.
Part: Door ajar switch
DIY Solutions
Check and reset power source
- Ensure refrigerator is plugged in firmly.
- Check and reset circuit breaker for the outlet.
- Try plugging into a different known working outlet.
Inspect power cord and outlet
- Unplug fridge and examine power cord for visible damage.
- Check outlet with another device to confirm it has power.
- If cord is damaged, note that replacement requires professional service.
Professional Repairs
Replace control board/electronics
Compressor or sealed system repair
When to Call a Professional
Preventive Maintenance
-
Clean condenser coils: Overheating and compressor overload leading to failure
Frequency: annually -
Check door seals: Door not closing properly leading to inefficient cooling and overwork
Frequency: bi‑annually
Frequently Asked Questions
Why is my LG Refrigerator not working?
How do I fix LG Refrigerator not working myself?
How much does it cost to fix not working?
When should I call a technician for not working?
References & Sources
Community Analytical Insights
Analysis based on real user discussions from appliance repair communities
Can I Fix This Myself?
Common Issues Reported by Users
- Main PCB (Power Control Board) failure due to power surge from lightning strike
- Tripped circuit breaker or blown fuse due to electrical surge
- Compressor damage from power surge
User Suggested Solutions
-
Check and reset the circuit breaker or replace the blown fuse. Ensure the refrigerator is plugged in and the outlet is functioning. If the breaker trips again, there may be a deeper electrical issue.
-
Inspect and replace the main PCB if it shows signs of damage (burn marks, smell of burnt electronics). Ensure to disconnect power before working on the unit.
-
If the compressor is suspected to be damaged, consult a professional technician for diagnosis and replacement, as this involves handling refrigerants and high-voltage components.
Analysis based on 1 community discussions
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
doesn't work after lightning strike
Replace the main PCB (power control board)
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!