Hoover Washer Dryer: not heating

Possible Causes

Blown thermal fuse

How to Identify: Dryer runs but no heat; fuse continuity test required with multimeter.

Part: Thermal fuse

Overloaded or improper loads

How to Identify: Drying capacity exceeded or thick fabrics mixed cause poor dryness, not necessarily no heat.

Part: User operation

Low room temperature or humidity effects

How to Identify: Drying works poorly primarily in cold spaces.

Part: Ambient conditions

DIY Solutions

Clean lint filter & ventilation path

Easy 10-15 minutes

Tools Needed: soft brush

1. Remove and inspect lint filter.
2. Clear lint from filter and visible vents; ensure airflow path is unobstructed.

⚠️ Safety First: Ensure appliance is off and cool before cleaning.

Check thermal fuse continuity

Moderate 15-30 minutes

Tools Needed: screwdriver, multimeter

1. Unplug washer dryer.
2. Access back panel to locate thermal fuse (often on blower housing).
3. Use multimeter to test continuity; replace if open.

⚠️ Safety First: Disconnect power before opening unit.

Test heating element continuity

Moderate 20-40 minutes

Tools Needed: screwdriver, multimeter

1. Unplug unit and remove access panel.
2. Locate heating element assembly.
3. Test continuity across heating element with multimeter; replace if open circuit.

⚠️ Safety First: Ensure correct replacement element for model.

Next step

Choose the next step for not heating

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Thermal Fuse

A safety device that cuts off power to the appliance if it starts to overheat.

Typical part-only price

$10 - $20

DIY difficulty

Easy

Estimated time

10-20 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Washer Dryer parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dryer Vent Cleaning Kit

Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.

View maintenance supply

Maintenance supply

Lint Trap Cleaning Brush

A narrow brush for routine cleaning around an accessible lint screen and housing.

View maintenance supply

Maintenance supply

Dryer Vent Hose Kit

A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace heating element assembly

Estimated Cost: $50 - $150

Replace thermal fuse

Estimated Cost: $15 - $50

When to Call a Professional

If internal electrical components (heater, fuse) replacement is needed and you are not comfortable with disassembly

If the model displays error codes indicating internal faults

If airflow cleaning did not improve drying performance

Preventive Maintenance

• Clean lint filter after every use: Airflow blockage and reduced heating efficiency
  Frequency: After each cycle
• Inspect and clean dryer duct/vent annually: Airflow obstruction and overheating risks
  Frequency: Annually

Frequently Asked Questions

Why is my Hoover Washer Dryer not heating?

Common causes include a blown thermal fuse, overloaded loads, or low room temperatures.

How do I fix Hoover Washer Dryer not heating myself?

Clean the lint filter, check the thermal fuse for continuity, and test the heating element.

How much does it cost to fix not heating?

Professional repairs range from $15 for a thermal fuse to $150 for a heating element replacement.

When should I call a technician for not heating?

If DIY solutions do not resolve the issue or if you're uncomfortable with electrical repairs.

Common Issues Reported by Users

• Faulty heating element (2 mentions)
• Blocked ducting (1 mentions)

User Suggested Solutions

1. Replace faulty heating element

2. Clear blocked ducting

Community Discussions

dryer stopped producing heat

Service man replaced a part.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair