Hoover Washer Dryer: making drilling sound
What is this symptom?
Is your Hoover washer dryer making a drilling sound during operation? This unusual noise, particularly during spin or drying cycles, could indicate issues such as foreign objects in the drum, an unbalanced load, or worn drum bearings. Addressing these problems promptly can help prevent further damage and restore quiet operation.
Important Tips for Hoover Models
- Hoover advises that persistent rumbling beyond initial use may require engineer visit. Checking drum for objects and cleaning filters are first steps.
Possible Causes
Foreign objects in drum or pump
How to Identify: Unusual rattling or metallic noise early in cycle; locate coins, buttons, or other items inside drum or pump filter.
Part: Drum cavity or drain pump
Unbalanced load or leveling issue
How to Identify: Machine shakes, vibrates excessively; drilling noise varies with load distribution.
Part: Machine feet / internal suspension
Worn drum bearings
How to Identify: Grinding or deep rumbling sound that worsens with drum spin; rough feel when manually rotating drum.
Part: Drum bearings
Faulty motor or drive components
How to Identify: Noise synchronized with drum rotation speed; performance issues like slow spin.
Part: Drive motor / belt
DIY Solutions
Remove foreign objects from drum and filter
- Unplug the machine.
- Open the washer dryer door and inspect the drum for loose items.
- Check the drain pump filter (accessible at bottom front) and remove debris.
- Manually spin the drum to ensure no hidden objects remain.
Balance load and adjust leveling feet
- Stop the current cycle and redistribute clothes evenly inside the drum.
- Check machine feet and adjust to ensure all contact the floor firmly.
- Run a short spin cycle to see if noise persists.
Next step
Choose the next step for making drilling sound
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drum Bearing Kit
Supports the spinning drum and ensures smooth, quiet rotation during cycles.
Drive Motor
Drives the drum, agitator, or pump to rotate during cycles.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace drum bearings
Inspect and repair motor/drive system
When to Call a Professional
Preventive Maintenance
-
Clean drain pump filter: Noise from foreign objects and pump obstruction
Frequency: every 3 months -
Check machine leveling: Vibration and noise due to imbalance
Frequency: monthly
Frequently Asked Questions
Why is my Hoover Washer Dryer making drilling sound?
How do I fix Hoover Washer Dryer making drilling sound myself?
How much does it cost to fix making drilling sound?
When should I call a technician for making drilling sound?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged drum bearings
- Foreign object lodged in the drum or pump
- Faulty motor or motor coupler
User Suggested Solutions
-
Inspect and replace the drum bearings: Unplug the washer dryer, remove the front panel, and check the drum bearings for wear. If damaged, replace them with new ones. Reassemble the unit and test.
-
Check for foreign objects: Open the door and inspect the drum for any items stuck inside. Also, check the lint filter and pump for blockages. Remove any foreign objects found.
-
Test and replace the motor or motor coupler: Unplug the appliance, access the motor by removing the back panel, and test the motor with a multimeter. If faulty, replace the motor or coupler.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!