Frigidaire Refrigerator: filter replacement indicator lights on

Professional Repair Guide

What is this symptom?

If your Frigidaire refrigerator's filter replacement indicator is illuminated, it may signal that the water or air filter needs replacing or that the system requires a reset. This can happen even if you've recently changed the filter or it appears to be in good condition. Understanding how to troubleshoot this issue can help restore normal operation and ensure your refrigerator runs efficiently.

Urgency: Low

Important Tips for Frigidaire Models

Frigidaire refrigerators require a manual reset of the filter indicator after each filter change; failing to do this is a common reason the light stays on. (Appliance Update

Possible Causes

Indicator not reset after filter replacement

How to Identify: If the filter was recently replaced but the indicator remains on, the light likely needs to be manually reset.

Part: Control panel / filter indicator

DIY Solutions

Reset the Filter Indicator Light

Easy 1-2 minutes

Locate the filter reset button on the refrigerator’s control panel (often labeled 'Reset', 'Filter Reset', or similar).
Press and hold the filter reset button for the duration recommended by the manufacturer until the light turns off.
If no dedicated button exists, consult your model’s manual for the exact reset sequence (sometimes a combination of buttons).

Next step

Choose the next step for filter replacement indicator lights on

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Model number required

Browse by model — no specific failed part is claimed

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Enter your complete model number for compatible results

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply

Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace or Inspect Faulty Filter Sensor or Timer

Estimated Cost: $50 - $200

When to Call a Professional

Indicator light does not reset after correct reset procedure and correct filter installation.

There are additional error codes or control panel malfunctions accompanying the light.

Preventive Maintenance

Replace water filter regularly per manufacturer schedule: Persistent indicator light and ensures water quality
Frequency: approximately every 6 months or as recommended

Frequently Asked Questions

Why is my Frigidaire Refrigerator filter replacement indicator lights on?

It often indicates the filter needs replacement or that the indicator hasn't been reset after changing the filter.

How do I fix Frigidaire Refrigerator filter replacement indicator lights on myself?

To fix it, locate the filter reset button and hold it for 3-5 seconds, or check your manual for the specific reset sequence.

How much does it cost to fix filter replacement indicator lights on?

Professional repairs for a faulty filter sensor or timer typically range from $50 to $200.

When should I call a technician for filter replacement indicator lights on?

Consider calling a technician if the indicator remains on after resetting or if you suspect a sensor issue.

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

The refrigerator's filter replacement timer has not been reset after filter change
The water or air filter is clogged or not functioning properly
An incorrect filter type is installed that is not compatible with the refrigerator

User Suggested Solutions

Reset the filter replacement timer by pressing and holding the reset button for 3 seconds until the indicator lights turn off.
Replace the water and air filters with the correct Frigidaire compatible filters to ensure proper functionality.
Check the installation of the filters to ensure they are seated properly and that there are no leaks.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

Any way to avoid new water & air filter (($ 60+) every 6 mon...

Community Discussions

Replace Water Filter and Replace Air Filter lights are on

Reset the filter timer and consider using alternative filters or methods to reduce costs.