Electrolux Washer Dryer: not drying
What is this symptom?
Is your Electrolux Washer Dryer failing to dry clothes completely? If your laundry comes out damp or wet after the drying cycle, it could be due to clogged filters, incorrect settings, or even a malfunctioning heating element. Understanding the common causes can help you troubleshoot effectively.
Important Tips for Electrolux Models
- Electrolux washer dryers require water supply even during drying for certain models; ensure water tap is on.
Possible Causes
Clogged air/heat pump filters or lint traps reducing airflow
How to Identify: Drying ineffective despite correct settings; visible lint in filters or blocked air intakes/heat pump filters; longer than normal cycle.
Part: Air filters / lint trap
Overloading the drum reducing airflow
How to Identify: Too many items in drum; heavy items clumped together; improved drying with smaller load.
Part: Load size
Incorrect drying program or settings
How to Identify: Using wash only or incorrect dryness level; selecting automatic cycle unsuitable for laundry type.
Part: Control settings
Blocked vent or exhaust pathway (external or internal)
How to Identify: Warm damp clothes; poor airflow at vent exit; lint buildup in exhaust hose.
Part: Vent/exhaust hose
Faulty heating element or thermostat
How to Identify: Dryer runs but produces little or no heat (clothes warm or cold; multimeter shows broken element continuity.
Part: Heating element / thermostat
Faulty moisture sensor
How to Identify: Cycle ends prematurely with clothes still damp; sensor not detecting moisture correctly.
Part: Moisture sensor
DIY Solutions
Clean air filters and lint traps
- Turn off and unplug the washer dryer
- Locate and remove primary and secondary air filters and lint trap
- Use cloth and vacuum to remove lint and debris
- Reinstall filters and run short drying cycle to test
Reduce load size and correct loading
- Remove excess items to reduce overall load
- Separate heavy from light fabrics
- Redistribute items evenly in drum
Select correct drying program
- Check user manual for correct drying settings
- Select appropriate dryness level and fabric type
- Restart drying cycle
Next step
Choose the next step for not drying
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dryer Lint Filter
Captures lint from exhaust air before it reaches the dryer vent path.
- Typical part-only price
- $15 - $55
- DIY difficulty
- Easy
- Estimated time
- 5 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Dryer Moisture Sensor
Detects moisture in clothing so automatic drying cycles can stop at the selected dryness level.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Heating element or thermostat replacement
Vent system cleaning or repair
Moisture sensor diagnosis and replacement
When to Call a Professional
Preventive Maintenance
-
Clean lint filter: Airflow restriction and drying inefficiency
Frequency: after every use -
Inspect and clean air filters: Clogging that lengthens drying cycles
Frequency: monthly
Frequently Asked Questions
Why is my Electrolux Washer Dryer not drying?
How do I fix Electrolux Washer Dryer not drying myself?
How much does it cost to fix not drying?
When should I call a technician for not drying?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Faulty temperature sensor (Ed8 error)
- Blocked venting system
- Overloading the dryer
User Suggested Solutions
-
Check and replace the temperature sensor. Unplug the machine, locate the sensor (usually near the heating element), and test it for continuity. If faulty, replace it with a new one.
-
Inspect and clean the venting system. Remove any lint buildup from the vent hose and the exterior vent. Ensure the vent is not crushed or blocked.
-
Reduce the load size. Check the manufacturer's guidelines for load capacity and avoid overloading the dryer to ensure proper airflow.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
Machine stops drying process 5 minutes after starting
The 'Ed8' error indicates a problem with the dryer's temperature sensor.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!