Electrolux Dryer: squeaking, error code E50

Professional Repair Guide

What is this symptom?

If your Electrolux dryer is squeaking and displaying an E50 error code, it indicates a potential motor or drive fault. The squeaking noise may occur during startup or while the drum is rotating. Common causes include a faulty motor, worn drive belt, or issues with the idler pulley. Addressing these concerns promptly can prevent further damage and restore your dryer's functionality.

Urgency: Medium

Important Tips for Electrolux Models

  • Official Electrolux guidance indicates E50 is a motor or software-related fault and recommends resetting then authorized service if unresolved

Possible Causes

Motor or motor control fault (E50)

How to Identify: E50 code displayed; drum may not rotate or intermittently stop; motor may overheat or fail; noise may accompany error

Part: Dryer motor or motor control circuitry

Worn drive belt causing squeaking

How to Identify: Squeaking noise when drum spins, belt may appear glazed or frayed when inspected; drum may rotate unevenly or slip

Part: Drive belt

Worn idler pulley or tensioner

How to Identify: High-pitched squealing/squeaking from pulley area, belt tension issues, pulley wheel may not spin freely when inspected

Part: Idler pulley assembly

Worn drum rollers or bearings

How to Identify: Persistent squeak that worsens during rotation, resistance when turning drum by hand; visible wear on roller surfaces

Part: Drum support rollers/bearings

Foreign object trapped causing friction

How to Identify: Squeak may occur at specific drum positions; objects visible between drum and casing when inspected with light

Part: Drum interior/space between drum and bulkhead

DIY Solutions

Inspect and replace worn drive belt

Moderate 30-60 minutes
Tools Needed: screwdriver, socket/wrench set
  1. Unplug dryer from power.
  2. Remove access panels to expose drum and belt.
  3. Inspect belt for wear/fraying.
  4. Replace belt with correct Electrolux model-specific part.
  5. Reassemble and test dryer operation.
⚠️ Safety First: Always disconnect power before opening machine

Check and replace idler pulley

Moderate 45-90 minutes
Tools Needed: screwdriver, socket set, pliers
  1. Disconnect dryer from power.
  2. Remove dryer panel to access drive assembly.
  3. Manually spin idler pulley to check smoothness.
  4. If pulley is worn or noisy, remove and install new one.
  5. Reassemble and test dryer.
  6. Ensure belt routing is correct.
⚠️ Safety First: Unplug before working inside the dryer

Inspect drum rollers/bearings

Moderate To Advanced 60-120 minutes
Tools Needed: screwdrivers, socket set, replacement rollers if needed
  1. Disconnect dryer and open cabinet.
  2. Rotate drum by hand; if stiff or noisy, remove drum.
  3. Inspect rollers and bearings for wear.
  4. Replace worn rollers/bearings.
  5. Reassemble and test rotation without load.
⚠️ Safety First: Multiple panels need removal; follow model-specific manual

Remove trapped foreign object

Easy 10-15 minutes
Tools Needed: flashlight, long tweezers or small tool
  1. Unplug power.
  2. Use flashlight to inspect between drum and bulkhead for objects.
  3. Use tool to extract any found object.
  4. Close dryer and test run.
⚠️ Safety First: Ensure unplugged before probing inside

Professional Repairs

Motor or motor control replacement

Estimated Cost: $200 - $500+

Full drive assembly service and lubrication

Estimated Cost: $150 - $350

When to Call a Professional

Dryer displays persistent E50 error after reset and motor belt/component inspections
Drum does not rotate or shows mechanical binding
Motor humming or overheating signs

Preventive Maintenance

  • Clean lint filter and internal lint pathways: Lint accumulation that can strain motor and components
    Frequency: after every use or weekly
  • Inspect belts, pulleys and rollers annually: Wear-related squeaking and motor strain
    Frequency: annually

Frequently Asked Questions

Why is my Electrolux Dryer squeaking, error code E50?
Common causes include motor faults, a worn drive belt, or issues with the idler pulley.
How do I fix Electrolux Dryer squeaking, error code E50 myself?
Check for worn drive belts, idler pulleys, or remove any foreign objects causing friction.
How much does it cost to fix squeaking, error code E50?
Professional repairs can range from $200 to $500+ for motor replacement or $150 to $350 for drive assembly service.
When should I call a technician for squeaking, error code E50?
If DIY fixes don't resolve the issue within a reasonable time, or if the problem seems complex, call a technician.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

60%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Worn or damaged drum rollers
  • Faulty drive belt
  • Malfunctioning motor or motor bearings

User Suggested Solutions

  1. Inspect and replace worn drum rollers. Open the dryer, remove the drum, and check the rollers for wear. Replace if necessary.

  2. Check and replace the drive belt. Remove the front panel, inspect the belt for damage, and replace it if frayed or broken.

  3. Examine the motor and motor bearings. If the motor is making noise, it may need lubrication or replacement. This is more complex and may require professional help.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Electrolux Dryer Model EIED200QSW00 Error Code E50. And a be...

Community Discussions

squeaking noise, error code E50

Replaced the whole dryer after receiving quotes for repair.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!