Electrolux Dryer Error E20

⚡ Quick Answer: The Electrolux Dryer E20 error code indicates a problem with water drainage, often linked to a blocked or improperly connected drain hose. This issue ... ✅ DIY Fixable

What Does Error E20 Mean?

The Electrolux Dryer E20 error code indicates a problem with water drainage, often linked to a blocked or improperly connected drain hose. This issue can prevent the dryer from heating effectively, and it's typically accompanied by two beeps or flashes on the control panel. If water is accumulating in the collection tank and not draining, it may disrupt the drying cycle, causing it to stop mid-program. Addressing this issue involves checking the drain hose and ensuring proper connections.

Common Symptoms:

  • E20 displayed on the dryer control panel
  • Two beeps or two flashes accompanying the error
  • Cycle may stop mid‑program
  • Water is not draining from the condenser/collection tank

Possible Causes

  • Drainage/pump issue (e.g., blocked or improperly connected drain hose) (medium)
  • Software/pump communication error (low)

How to Fix Error E20

DIY Fix Check and correct drain hose and reset

  1. Unplug the dryer from the mains.
  2. If using a condenser dryer with external drain hose, ensure the hose is correctly connected to a drain.
  3. Check the drain hose for kinks, twists, or blockages and straighten/clean as needed.
  4. Plug the dryer back in and restart a drying cycle to see if the error clears.

Technician Only Inspect drain pump and related components

  1. Disconnect power and access the rear/pump area per service manual.
  2. Inspect and clean the drain pump and hoses for debris or blockage.
  3. Verify pump motor operation and continuity with appropriate tools.
  4. Check wiring/connectors between the pump and control board for damage or loose connections.

Parts needed: Drain pump, Drain hose, Pump electrical connectors

🛑 When to Call a Pro:
  • If error persists after checking and cleaning drain hose and pump
  • If water continues to accumulate in the collection tank without drainage
  • If diagnostic tools indicate electrical failures in pump or control board

Technical Specifications

wattage 5400W
component Heating Element
resistance 10-30 ohms
part_number 5304502026
voltage_rating 240V AC

Common Questions

What does E20 error mean on Electrolux Dryer?

The E20 error indicates a drainage issue, preventing proper water removal during drying.

Can I fix Electrolux Dryer E20 error myself?

Yes, you can check the drain hose for blockages and ensure proper connection.

How much does it cost to fix E20 error?

Repair costs for the E20 error range from ¥5,000 to ¥20,000, depending on parts and service.

When should I call a technician for E20?

Call a technician if the error persists after checking the drain hose or if water continues to accumulate.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!