Electrolux Dryer: long drying time

Professional Repair Guide

What is this symptom?

Experiencing long drying times with your Electrolux dryer? If your clothes remain damp after cycles that exceed typical durations, it may be due to restricted airflow, dirty moisture sensors, or even the heat pump design. Understanding these issues can help you restore efficient performance.

Urgency: Medium

Important Tips for Electrolux Models

  • Heat pump dryers from Electrolux inherently have longer drying times which is normal

Possible Causes

Restricted airflow due to clogged lint filter or exhaust vent

How to Identify: Drying times longer than usual; lint visibly built up on filter; reduced airflow at vent; dryer feels hotter than normal.

Part: Lint filter, exhaust duct/vent

Heat pump dryer design (normal longer cycles)

How to Identify: Model uses heat pump technology; low-temperature drying cycles that are inherently longer.

Part: Dryer heat pump system

Dirty moisture sensors

How to Identify: Dryer runs longer than expected even when clothes are dry; sensors appear coated with residue.

Part: Moisture sensor bars

Insufficient power supply (incorrect voltage)

How to Identify: Dryer takes unusually long especially with electric dryers; plugged into lower-voltage circuit.

Part: Power supply/circuit

DIY Solutions

Clean lint filter and exhaust vent

Moderate 15–30 minutes
Tools Needed: vacuum with brush attachment, soft brush
  1. Unplug the dryer and remove the lint filter.
  2. Clean the lint filter thoroughly; vacuum the filter housing and surrounding area.
  3. Detach the exhaust vent/duct from dryer and outside wall.
  4. Remove lint buildup inside vent manually or with a vacuum/brush.
  5. Reattach vent securely and test dryer performance.
⚠️ Safety First: Unplug dryer before working on vents to avoid injury

Sort loads and use appropriate drying programme

Easy 5–10 minutes
  1. Check the load size and remove excess items if overloaded.
  2. Separate heavy and light fabrics into different loads.
  3. Select a drying programme appropriate for the fabric type.
  4. Avoid opening the door during the cycle to reduce heat loss.

Clean moisture sensors

Easy 5 minutes
Tools Needed: rubbing alcohol, soft cloth
  1. Locate the moisture sensor bars inside the dryer drum.
  2. Dampen a cloth with rubbing alcohol.
  3. Gently wipe the sensor bars to remove any residue.
  4. Run a cycle to check if drying time improves.
⚠️ Safety First: Ensure dryer is off before cleaning sensors.

Professional Repairs

Professional vent and duct cleaning

Estimated Cost: $100 - $300

Replace faulty moisture sensor or control board

Estimated Cost: $150 - $400

Heating element or power component replacement

Estimated Cost: $100 - $350

When to Call a Professional

After cleaning filters and vents if long dry times persist
If dryer shows error codes, unusual noises, or fails to heat properly

Preventive Maintenance

  • Clean lint filter: Airflow restriction and prolonged drying time
    Frequency: after every load
  • Inspect and clean dryer vent: Vent blockage and fire hazard
    Frequency: annually or biannually

Frequently Asked Questions

Why is my Electrolux Dryer long drying time?
Common causes include clogged lint filters, dirty moisture sensors, or the normal operation of heat pump dryers.
How do I fix Electrolux Dryer long drying time myself?
Clean the lint filter and exhaust vent, sort loads appropriately, and clean moisture sensors to improve drying efficiency.
How much does it cost to fix long drying time?
Professional repairs can range from $100 to $400 depending on the issue, such as vent cleaning or sensor replacement.
When should I call a technician for long drying time?
If DIY solutions don't resolve the issue or if you suspect a faulty component, it's best to contact a professional.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Blocked venting system
  • Dirty lint filter
  • Faulty heating element

User Suggested Solutions

  1. Clean the venting system by disconnecting the vent hose and removing any lint or debris. Ensure the vent is not crushed or kinked. Reconnect and test the dryer.

  2. Remove and clean the lint filter after every use. If it is heavily soiled, wash it with soap and water, then let it dry completely before reinserting.

  3. Test the heating element for continuity using a multimeter. If faulty, replace the heating element by removing the back panel of the dryer.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Electrolux dryer

Community Discussions

takes forever to dry

Cleaning the condenser and double-spinning laundry can reduce drying time.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!