Beko Washer Dryer: banging during spin cycle

Professional Repair Guide

What is this symptom?

If your Beko washer dryer is making loud banging, thumping, or clunking noises during the spin cycle, it may be shaking or moving excessively. This can be caused by unbalanced loads, worn shock absorbers, or even foreign objects inside the drum. Addressing these issues promptly can help prevent further damage and ensure smooth operation.

Urgency: Medium

Important Tips for Beko Models

Always remove transport bolts and packaging material after installation; Beko guidance emphasizes proper initial setup.

Possible Causes

Unbalanced load distribution

How to Identify: Noise occurs inconsistently and changes if laundry load size or arrangement is changed; load feels uneven

Part: Drum / Laundry load

Worn or damaged shock absorbers/suspension

How to Identify: Persistent heavy banging even after load adjustments and leveling; often felt as thumping from underside

Part: Shock absorbers / Suspension rods

Foreign object inside drum or under tub

How to Identify: Banging may sound metallic or irregular; sometimes objects like coins/pins cause impacts inside drum

Part: Drum interior / Tub area

Worn drum bearings

How to Identify: Loud clunking/grinding throughout spin cycle; noise persists irrespective of load distribution

Part: Drum bearings

DIY Solutions

Redistribute Load and Reduce Overload

Easy 5-10 minutes

Stop machine mid-cycle or before starting spin
Open door, adjust laundry evenly or reduce load size
Restart cycle and monitor sounds

⚠️ Safety First: Ensure power is off before handling laundry

Level the Washer and Remove Transport Bolts

Moderate 15-30 minutes

Tools Needed: Adjustable wrench, Spirit level

Turn off and unplug machine
Check and adjust feet so washer is level using a spirit level
If new, locate and remove transport bolts at rear according to manual
Tighten feet and reâ€‘check level

⚠️ Safety First: Follow manual instructions to avoid damage

Professional Repairs

Replace Shock Absorbers/Suspension Components

Estimated Cost: $80 - $200

Drum Bearing Replacement

Estimated Cost: $150 - $400

When to Call a Professional

Noise persists after adjusting load/leveling

Suspicion of internal mechanical failures (bearing/shock absorber)

Unusual metallic bangs or grinding sounds not linked to load imbalance

Preventive Maintenance

Check level and adjust feet: Imbalance and vibration issues
Frequency: monthly
Inspect and clean drum and remove foreign objects: Noise from objects striking drum
Frequency: monthly

Frequently Asked Questions

Why is my Beko Washer Dryer banging during spin cycle?

Common causes include unbalanced load distribution, worn shock absorbers, or foreign objects in the drum.

How do I fix Beko Washer Dryer banging during spin cycle myself?

Redistribute the load or level the machine. Check for transport bolts if it's new.

How much does it cost to fix banging during spin cycle?

Professional repairs can range from $80 to $400 depending on the issue.

When should I call a technician for banging during spin cycle?

Consider calling a technician if DIY fixes don't resolve the issue or if drum bearings are worn.

References & Sources

Beko guidance on fixing shaking/vibration Official
Common causes of Beko washer shaking during spin Community
General repair discussion on washer banging causes Community
Independent washer vibration and fix overview Repair-Blog

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Unbalanced load due to improper loading of clothes
Worn or damaged shock absorbers or dampers
Faulty or misaligned drum bearings

User Suggested Solutions

Redistribute the load evenly in the drum. Remove excess items and ensure that heavier items are balanced with lighter ones.
Inspect and replace worn shock absorbers. Remove the back panel, locate the shock absorbers, and replace them if they show signs of wear.
Check and replace drum bearings if they are faulty. This involves disassembling the drum, which may require special tools.