Beko Washer Dryer Error E43

⚡ Quick Answer: The Beko washer dryer error E43 indicates a potential malfunction in the door lock mechanism, which may prevent the appliance from starting or cause t... ✅ DIY Fixable

What Does Error E43 Mean?

The Beko washer dryer error E43 indicates a potential malfunction in the door lock mechanism, which may prevent the appliance from starting or cause the door to fail to lock properly. To address this issue, ensure that the door is fully closed and latched, and verify that the machine is level and not overloaded. If the problem persists, consult your model's official manual for further guidance.

Possible Causes

  • Door Lock Mechanism

How to Fix Error E43

DIY Fix Basic checks

  1. Consult the exact model’s official manual to see if E43 is defined.
  2. Check that the door/drawer is fully closed and latched.
  3. Ensure the machine is level and not overloaded.
  4. Inspect and clean common serviceable items (lint filters, drain pump filter) following the manual.

Technician Only Professional diagnosis

  1. Use the manufacturer’s diagnostic mode (if available) to read stored fault codes.
  2. Refer to the official Beko service manual for the specific model to interpret E43.
  3. Test and inspect internal sensors and modules associated with the display and error reporting system.
🛑 When to Call a Pro:
  • If the error persists after basic checks and the meaning cannot be verified via official documentation.

Technical Specifications

wattage N/A
component Door Lock Mechanism
resistance 1-5 ohms
part_number Beko 280020010
voltage_rating 230V AC

Common Questions

What does E43 error mean on beko washer dryer?

E43 indicates a malfunction in the door lock mechanism, preventing the appliance from starting.

Can I fix beko washer dryer E43 error myself?

Yes, check that the door is fully closed and latched, and ensure the machine is level.

How much does it cost to fix E43 error?

Repair costs vary depending on the model and region.

When should I call a technician for E43?

Call a technician if the error persists after basic checks and you cannot find a solution.

Sources & References

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!